BE
BODY ELECTRICAL – LIGHTING
02KBE18Y
Key Unlock
Warning Switch*
1
Ignition*
1
/Engine*
2
Switch
(IG1 Relay, ACC Relay)
Courtesy Switches
(All Door)
Door Position
Switches (All Door)
Certification ECU*
2
Entry Illumination
Signal
CAN
(MS Bus)
Main
Body
ECU
Ignition Switch*
1
Illumination
Interior Light
Foot Well Illumination*
3

Door Inside Handle
Illumination*
3
Engine Switch*
2
Illumination
BE-39
JILLUMINATED ENTRY SYSTEM
1. General
D The illuminated entry system of the new Camry controls 4 kinds of light: interior light, ignition
switch*
1
/engine switch*
2
illumination, foot well illumination*
3
and door inside handle illumination*
3
.
D The interior light is operated when the light switch is in the DOOR position.
"
System Diagram
A
*
1
: Models without the smart entry and start system
*
2
: Models with the smart entry and start system
*

3
: Only for E and G grade models for Taiwan and Thailand, G grade models for Indonesia and the
Philippines, and E grade models for Vietnam
BODY ELECTRICAL – LIGHTING
02KBE19TE
Door Lock Assembly
D Door Position Switch
Interior Light*
1
Door Courtesy Switch
Door Lock Assembly
D Door Position Switches
Door Courtesy
Switches
Door Courtesy Switch
Interior Light*
3
Light Switch*
3
Overhead Console
Certification ECU*
4
Door Inside Handle*
2
Key Unlock
Warning Switch*
5
Main Body ECU
Engine Switch*
4

Ignition Switch*
5
BE-40
2. Layout of Main Components
*
1
: Only for models without the sliding roof system
*
2
: Only for E and G grade models for Taiwan and Thailand, G grade models for Indonesia and the
Philippines, and E grade models for Vietnam
*
3
: Only for models with the sliding roof system
*
4
: Only for models with the smart entry and start system
*
5
: Only for models without the smart entry and start system
BE
BODY ELECTRICAL – LIGHTING
02KBE128Y
Light OFF State
Condition (2)
Condition (4)Condition (1)
Light ON State
(15 second duration)*
1
Condition (3)

Condition (6)
Condition (5)
Light ON State
(Constantly ON)
Condition (2)
BE-41
3.Interior Light Control
DThe interior light control (interior light and ignition switch illumination*
1
/engine switch illumination*
2
)
consists primarily of the fade-in/fade-out function and timer illumination function.
DThe interior light control activates as described in the diagram below when one of items is in the respective
state.
DThis control is controlled by the main body ECU.
*
1
: Models without the smart entry and start system
*
2
: Models with the smart entry and start system
Condition
Item
Condition (1)
DWith power source*
2
OFF and all doors closed, any door is unlocked.
DWith all doors closed, power source*
2

is changed from ACC to OFF.
DWith power source OFF and all doors closed, key enters any actuation area
around the doors. (Only for models with smart entry and start system)
Condition (2) DAny door is open.
Condition (3) DWith power source*
2
OFF, all doors are closed, any door is unlocked.
Condition (4)
DPower source*
2
is ACC or ON.
DMore than 15 seconds have elapsed since the Light ON State (15 second
duration)*
1
.
DWith power source*
2
OFF and all doors closed, all doors are locked.
Condition (5) DWith power source*
2
ACC or ON, all doors are closed or locked.
Condition (6)
DWith power source OFF and all doors closed, key enters any actuation area
around the doors. (Only for models with smart entry and start system)
DWith power source*
2
OFF and all doors locked, any door is unlocked.
*
1
:The function setting can be changed using the customized body electronics system. For details, refer to

Customized Body Electronics System section on page BE-14.
*
2
: The power source condition can be changed by operating the engine switch on models with the smart
entry and start system, and the ignition switch on models without the smart entry and start system.
BODY ELECTRICAL– LIGHTING
241BE33
Condition (9)
Light OFF State
Condition (7)
Condition (4)Condition (1)
Light ON State
(15 second duration)*
Light Adjustment State
(Approx. 10% brightness of Light ON
State)*
Condition (3)Condition (2)
Condition (5)
Light ON State
(Constantly ON)
Condition (6)
BE-42
4.Foot Well Illumination and Door Inside Handle Illumination Control
DThe foot well illumination control consists primarily of the fade-in/fade-out function and timer
illumination function.
DThe foot well illumination control activates as described in the diagram below when one of items enters
the respective state.
DThis control is controlled by the main body ECU.
Condition
Item

Condition (1) DWith power source*
1
OFF and all doors closed, any door is unlocked.
Condition (2)
DAny door is open.
DWith shift lever at P position, power source*
1
is changed from OFF to ON.
Condition (3)
DWith power source ACC or OFF*
1
, all doors are closed.
DWith all doors closed, power source*
1
is changed from ON to OFF.
Condition (4)
DMore than 15 seconds have elapsed since start of the Light ON State (15
seconds duration)*
2
.
DWith power source*
1
OFF and all doors closed, all doors are locked.
Condition (5) DShift lever is put into other than P position with power source*
1
ON.
Condition (6)
DWith power source ON, shift lever is put into P position or any door is
opened with shift lever in any position except P.
Condition (7)

DWith shift lever in other than P position, power source*
1
is changed from
OFF to ON.
Condition (8) DWith power source*
1
OFF and all doors locked, all doors are closed.
Condition (9)
DAny door is open.
DWith shift lever in P position, power source*
1
is changed from OFF to ON.
*
1
:The power source condition can be changed by operating the engine switch on models with the smart
entry and start system, and the ignition switch on models without the smart entry and start system.
*
2
:The function setting can be changed using the customized body electronics system. For details, refer to
Customized Body Electronics System section on page BE-14.
BE
BODY ELECTRICAL – LIGHTING
BE-43
5. Battery Saving Control
When the following two conditions have been met, battery saving control turns off the lights illuminated by
the illuminated entry controls. Battery saving control is controlled by the main body ECU.
D The power source is OFF (models with smart entry and start system), or the ignition key is not in the
ignition key cylinder (models without smart entry and start system).
D There is no change in the condition of the doors for 20 minutes.