Fourth Edition
Network Solutions
Wireline Service Delivery Products
for North America

4/08 • 102494AE
Wireline Service Delivery Products for North America
iii
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Wireline Service Delivery Products
for North America
Table of Contents
Introduction 1
Pon Express
™
16 2
Next Generation SONET
LoopStar
®
800 3
LoopStar
®
1600 5
LoopStar
®
3600 8
Metro Ethernet
Ethernet Network Interface Unit (ENIU) 11
OptEnet Optical Extension Platform 12
LoopStar
®

780 23
LoopStar
®
714 and 718 24
LoopStar
®
711 25
LoopStar
®
712 26
LoopStar
®
722 27
LoopStar
®
750 28
10 Mbps Ethernet Access Solutions
WorldDSL
™
Single/Dual-Pair G.SHDSL 29
T1 Service Delivery Solutions
ThinMux
™
Mulitplexer, HiGain
®
HMU-319, Wideband 3190 31
HiGain CO Shelves, Test Shelves and Cards/Management 32
HiGain HDSLx CO Line Unit, Remote Unit Modules, Repeater/Doubler Modules 33
Soneplex
®

Loop Extender and Broadband System Chassis 34
Soneplex
®
HDSLx CO, Doubler and Remote Modules 35
Fiber Optic DS1 Delivery Solutions 36
T1 Indoor Remote Enclosures
HiGain
®
Remote Enclosures and Accessories 37
T1 Outdoor Doubler and Remote Enclosures
Radiator II/EnCaser
®
819 38
Enterprise LAN Extension Solutions
Campus-RS
™
: Remote Unit/Star Platform 39
Campus-RS
™
: Rate-Selectable SDSL Systems 41
Megabit Modems 42
DAML/DLC Solutions
PG-Flex
®
Micro-DLC System 43
PG-Plus
®
Subscriber Carrier System 44
Wireless Gigabit Ethernet
FlexWave

™
Millimeter Wave 45
λ

4/08 • 102494AE
Wireline Service Delivery Products for North America
1
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Founded in 1935, ADC has served the communications industry for more than half a century and
today is a leading supplier of global network infrastructure products and services. Today, ADC provides
innovative network infrastructure solutions that enable high-speed Internet, data, video and voice
services to residential, business and mobile subscribers.
ADC’s Wireline Service Delivery Products help you deliver high quality Ethernet and TDM in business
services applications over Copper or Fiber. Whether you are building a new network, expanding an
existing network, or increasing the manageability and reliability of a network already in place, ADC
has what you need. Our Metro Ethernet, Next Generation SONET, T1 Service Delivery, and Campus
products emphasize leading technology for maximum uptime, reliability, remote management and
monitoring, with the flexibility to take advantage of any of your legacy installed base. This focus on
technology, quality, and manageability reduces your cost of ownership while delivering the highest
quality services.
Learn More About Wireline Solutions
Within this catalog you’ll find product and ordering information for the most popular Wireline solutions.
Because we continually enhance our product portfolio and our specifications, we encourage you to visit
our website or contact an ADC representative to keep pace with the latest innovations.
Wireline Service Delivery Products
for North America
Introduction
4/08 • 102494AE
Wireline Service Delivery Products for North America
2

www.adc.com • +1-952-938-8080 • 1-800-366-3891
The PON (Passive Optical Network over wavelengths) Express 16 is the first transport platform
to use a Passive Optical Network (PON) architecture to break the access bottleneck. Using Dense
Wave Division Multiplexing (DWDM), the PON Express 16 provides cost-effective access to
business parks, campuses, and multi-dwelling unit/multi-tenant units over a shared network
infrastructure without sacrificing security or limiting bandwidth. Up to 16 customers can be
simultaneously connected with each having up to 1Gbps dedicated, symmetrical bandwidth.
Operationally, each Optical Network Terminal (ONT) is “colorless” which eliminates the sparing
issue that plagues traditional DWDM systems and provides “plug-n-play” system provisioning.
The PON Express 16 is integrated into other ADC products such as the OmniReach
®
FTTX Fiber
Distribution Hub FDH3000S providing a compelling solution unique to the industry.
λ
λ
λ
λ
PON Express
™
16
Universal Transport Platform for Access Networks
Description Catalog Number*
OLT Shelf
and Common
Equipment
19” Rack Mountable Chassis for Optical Line Terminating Equipment PNY16-OLT Shelf
Software license for OLT (1 PNYr OLT) PNY16-OLT SW
Main Control Unit (MCU) PNY16-MCU
Broadband Lightsource and Upstream AWG Mux/Demux PNY16-BMU
Variable speed fan unit containing 3 fans PNY16-OLT Fan

-48VDC Power Supply Unit PNY16-PSU
OM Shelf and
Module
Chassis PNY16-OM Shelf
Module PNY16-1310-OM
CO Line Cards
1.25 Gbps Ethernet Line Card for OLT PNY16-OCU-1250
125 Mbps Ethernet Line Card for OLT PNY16-OCU-125
Subscriber
Equipment
1.25Gbps Ethernet Subscriber Unit PNY16-ONT-1250
125Mbps Ethernet Subscriber Unit PNY16-ONT-125
Remote
Equipment
Downstream AWG Mux/Demux PNY16-RN
Ordering Information
4/08 • 102494AE
Wireline Service Delivery Products for North America
3
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Next Generation Sonet
LoopStar
®
800
The LoopStar
®
800 is an advanced next-generation SONET access system that allows service providers
to cost-effectively deploy and manage TDM and Ethernet services to end-user customers from a single
platform. Designed for both central office and customer premises environments, the LoopStar 800
is ideally suited for all network deployment applications. With an integrated universal back-plane

architecture, the system supports multiple interchangeable network and tributary interface cards for easy
and economical service deployments. Combined with advanced management, control and protection
features, the LoopStar 800 provides carriers the lowest total cost solution for delivering both TDM and
Ethernet services.
4/08 • 102494AE
Wireline Service Delivery Products for North America
4
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Next Generation Sonet
LoopStar
®
800
Ordering Information
x = 1, 2 or 3 (where 1 = 15km, 2 = 40km, and 3 = 80km)
y = 1, 2 or 3 (where 1 = 500m, 2 = 10km, and 3 = 40km)
Description Catalog Number
LoopStar 800 Chassis Assembly LPS-FRM800-L2
Face Plate Rear LPS-PATEH
2 Port OC-3 Optical I/F Unit - VT Switching Hardened, Requires SFP Optics LPS-TO3DH
2xOC-3 Optical Interface Unit with STS-1 Switching LPS-XO3D0x/H
OC-3 Optical Interface Unit with STS-1 Switching LPS-XO30x/H
2xOC-12 Optical Interface Unit with STS-1 Switching LPS-XO12D0x/H
OC-12 Optical Interface Unit with STS-1 Switching LPS-XO120x/H
2xOC-12 Optical Interface Unit LPS-OC12D0x/H
OC-12 Optical Interface Unit LPS-OC120x
4 Port OC-3 Optical Interface Unit Hardened Congurable, Requires SFP Optics LPS-OC3AH
4xOC-3 Optical Interface Unit LPS-OC3Q0x
2xOC-3 Optical Interface Unit LPS-OC3D0x
OC-3 Optical Interface Unit LPS-OC30x
8x100Base-T Ethernet LPS-EFS8

1GE-FX + 4X10/100Base-T Switched Ethernet (LS800/1600 Only) LPS-ET4GS
2 Port 1000Base-FX Ethernet Board, Hardened (Transparent, Without GE SFP Module)
LS800/1600 ONLY
LPS-EGT2H
4 Port FX Fast Ethernet LPS-ELS4/H
14xDS1 Tributary Unit LPS-PLT101/H
28xDS1 Tributary Unit LPS-PDT101/H
3xDS3 Tributary Unit LPS-PLT301/H
12 Port DS3/STS-1 Mapper Unit Hardened LPS-PQT3A01H
12 Port DS3/STS-1 Protection Unit, Hardened LPS-PQT3BH
12 Port DS3 Remote Test/Protection Unit Hardened LPS-PQT3P01H
6 Port DS3 Transmux LPS-PDM3/H
6 Port DS3 Transmux Remote Test/Protection Unit LPS-PDM3P01
6 Port DS3 Transmux Remote Test/Protection Unit Hardened LPS-PDM3P01H
84xDS1 Electrical Interface Board LPS-POI101/H
24xDS3 Electrical Interface Board LPS-POI301/H
28xDS1 + 12xDS3 Electrical Interface Board LPS-P1PI13
28 Port DS1 + 12 Port DS3 Mapper Unit Hardened LPS-PI1301H
56 Port DS1 + 6 Port DS3 Mapper Unit Hardened LPS-PQDIM01
4/08 • 102494AE
Wireline Service Delivery Products for North America
5
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Next Generation Sonet
LoopStar
®
1600
The LoopStar
®
1600 is an advanced, next-generation SONET multi-service transmission platform that

allows service providers to cost-effectively aggregate, deploy, and manage TDM and Ethernet services.
With its compact design and ability to scale from an OC-3 to an OC-192 network, the LoopStar 1600
provides a low-cost, high-growth solution for adding services at the central office or at the edge of
the network.
When used with the LoopStar 800 product, the LoopStar 1600 provides a cost-effective aggregation
point for multiple subtending rings. The LoopStar 1600 also can function as multiple virtual Add-Drop
Multiplexers (ADMs) for hub node applications. In addition, with its versatile cross-connect architecture
and high port count, this platform is an efficient alternative to existing cross-connect systems that
require significantly more rack space at two to three times the cost.
4/08 • 102494AE
Wireline Service Delivery Products for North America
6
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Next Generation Sonet
LoopStar
®
1600
Ordering Information
Description Catalog Number
LoopStar 1600 Chassis Assembly LPS-FRM1600-L1
LoopStar 1600 Enhanced Switching Unit LPS-I1AXCS
Cross-connect & System Control & Timing Board LPS-IXCSVT
Cross-connect & System Control & Timing Board (High Order) LPS-IXCSSTS
OC-192 Optical Interface Unit (IR-2, LC) 40km LPS-OC19202
OC-192 Optical Interface Unit (LS-64.2, LC) 80km, without BA LPS-OC19203
OC-192 Optical Interface Unit (Le-64.2, LC) 60KM LS1600 Only without BPA LPS-OC19204
OC-192 Optical Interface Unit (LR-2b, LC) 80KM LS1600 Only with BPA, DCU LPS-OC19205
OC-192 Optical Interface Unit (40 wavelength, 100G, G.692) LPS-OC192W
OC-48 Congurable Optical Interface Unit (without Optical Module) LS1600 Only LPS-OC48A
OC-48 Optical Interface Unit LPS-OC480x

OC-48 Optical Interface Unit (SR-1, LC) LPS-OC4804
OC-48 Optical Interface Unit (IR-2, LC) LPS-OC4805
OC-48 Optical Interface Unit (100KM, LC) LPS-OC4806
OC-48 Optical Interface Unit (40 Wavelength, 100G, G.692, 170KM) LPS-OC48W01*
OC-48 Optical Interface Unit (40 Wavelength, 100G, G.692, 640KM) LPS-OC48W02*
4 Port OC-12 Optical Interface Unit Congurable Hardened LPS-OC12AH
4xOC-12 Optical Interface Unit LPS-OC12Q0x
2xOC-12 Optical Interface Unit LPS-PLT101
2 Port OC-12 Optical Interface Unit (LR-2) LPS-OC12D0x
OC-12 Optical Interface Unit (IR-1) LPS-OC120x
8 Port OC-3 Optical Interface Unit, Requires SFP Optics LPS-OC30
4xOC-3 Optical Interface Unit LPS-OC3Q0x
2xOC-3 Optical Interface Unit LPS-OC3DOx
OC-3 Optical Interface Unit LPS-OC30x
Note: x = 1, 2, 3 (where 1 = 15 km, 2 = 40 km, 3 = 60 km)
*Contact customer service for correct part number used for a specic wavelength
4/08 • 102494AE
Wireline Service Delivery Products for North America
7
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Next Generation Sonet
LoopStar
®
1600
Ordering Information
Description Catalog Number
2x1000Base-FX Ethernet Board (Transparent, without GE SFP module) LPS-EGT2H
8x100Base-T Ethernet Board LPS-EFS8
4 Port OC-3 Optical Interface Unit Hardened Congurable, Requires SFP Optics LPS-OC3AH
1GE-FX + 4X10/100Base-T Switched Ethernet (LS800/1600 Only) LPS-ET4GS

4 Port FX Fast Ethernet LPS-ELS4/H
14xDS-1 Mapper Board LPS-PLT101/H
28xDS-1 Mapper Board LPS-PDT101/H
3xDS-3 Mapper Board LPS-PLT301/H
6xDS-3 Mapper Board 1600 only LPS-PDT301/H
6 Port DS3 Transmux Hardened LPS-PDM301H
6 Port DS3 Transmux Remote Test/Protection Unit LPS-PDM3P01
6 Port DS3 Transmux Remote Test/Protection Unit Hardened LPS-PDM3P01H
12 Port DS3/STS-1 Mapper Unit Hardened LPS-PQT3A01H
12 Port DS3/STS-1 Protection Unit, Hardened LPS-PQT3BH
12 Port DS3 Remote Test/Protection Unit Hardened LPS-PQT3P01H
Faceplate Front LPS-FF
56xDS1 Electrical Interface Board LPS-PQI101
12xDS3 Electrical Interface Board LPS-PQI301
12xDS3 Electrical Interface Board (1:1 protection only) LPS-PQSI301
24xDS3 Electrical Interface Board MINI-BNC LPS-POI301-16
28xDS1+6xDS3 Electrical Interface Board LPS-PDI1301
LS1600 Alarm, Timing and Extend Interface Unit LPS-IATE
Faceplate(rear) for 1600 LPS-BF
SFP 1310nm SM (10km) for Gigabit Ethernet Interface LPS-SFP1310
SFP 1340nm SM (40km) for Gigabit Ethernet Interface LPS-SFP1340
SFP 1510nm SM (10km) for Gigabit Ethernet Interface LPS-SFP1510
SFP 1540nm SM (40km) for Gigabit Ethernet Interface LPS-SFP1540
SFP 850nm MM (850m) for Gigabit Ethernet Interface LPS-SFP85
Note: x = 1, 2, 3 (where 1 = 15 km, 2 = 40 km, 3 = 60 km)
z = requires SFPs
*Contact customer service for correct part number used for a specic wavelength
4/08 • 102494AE
Wireline Service Delivery Products for North America
8

www.adc.com • +1-952-938-8080 • 1-800-366-3891
LoopStar
®
Metro 3600
SONET Multi-Service Transmission Platform
The LoopStar
®
Metro 3600 is an advanced, next-generation SONET multi-service transmission platform
that allows service providers to cost-effectively aggregate, deploy, and manage TDM and Ethernet
services. With its compact design and ability to scale from an OC-3 to an OC-192 network, the Metro
3600 provides a low-cost, high-growth solution for adding services at the central office or at the edge
of the network.
When used with the LoopStar 800 or LoopStar 1600 products, the Metro 3600 provides a cost-effective
aggregation point for multiple subtending rings. The Metro 3600 also can function as multiple virtual
Add-Drop Multiplexers (ADMs) for hub node applications. In addition, with its versatile cross-connect
architecture and high port count, this platform is an efficient alternative to existing cross-connect
systems that require significantly more rack space at two
to three times the cost.
4/08 • 102494AE
Wireline Service Delivery Products for North America
9
www.adc.com • +1-952-938-8080 • 1-800-366-3891
LoopStar
®
Metro 3600
SONET Multi-Service Transmission Platform
Description Catalog Number
LoopStar Metro 3600 chassis assembly LPS-FRM3600-L1
LoopStar 3600 chassis with 1*48 DS3(BNC) and 2*56 DS1 LPS-FRM3600-L7
LoopStar 3600 chassis with 2*48 DS3(BNC) LPS-FRM3600-L8

LoopStar 3600 chassis with 4*56 DS1 LPS-FRM3600-L9
3600 groupware for 19"/23"frame installation, fiber management, brackets, rear cover
and door
LPS-3600-OFI
Cross-connect and system control and timing board (35G STSI/5G VT1.5) LPS-GXCS01-L1
Cross-connect and system control and timing board (80G STSI/20G VT1.5) LPS-EXCS01-L1
LoopStar metro 3600 system auxillary board LPS-AUX-L1
OC-192 optical interface unit (IR-2, LC) 40km LPS-OC19202
OC-192 optical interface unit (LS-64.2, LC) 80km, without BA LPS-OC19203
OC-192 optical interface unit (Le-64.2, LC) 60KM LS1600 Only without BPA LPS-OC019204
OC-192 optical interface unit (LR-2b, LC) 80KM LS1600 Only with BPA, DCU LPS-OC19205
OC-192 optical interface unit (40 wavelength, 100G, G.692) LPS-OC192W
OC-48 configurable optical interface unit (without Optical Module) LS1600 only LPS-OC48A
OC-48 optical interface unit LPS-OC480x
OC-48 optical interface unit (SR-1, LC) LPS-OC4804
OC-48 optical interface unit (IR-2, LC) LPS-OC4805
OC-48 optical interface unit (100KM, LC) LPS-OC4806
4 Port OC-12 optical interface unit configurable hardened LPS-OC12AH
OC-12 optical interface unit (IR-1) LPS-OC120x
2 Port OC-12 optical interface unit (LR-2) LPS-OC12D0x
4 Port OC-12 optical interface unit (LR-2, LC) LS1600 Only LPS-OC12Q0x
Ordering Information
Note: x = 1, 2, 3 (where 1 = 15 km, 2 = 40 km, 3 = 60 km)
*Contact customer service for correct part numbers for SFP and specic wavelengths
4/08 • 102494AE
Wireline Service Delivery Products for North America
10
www.adc.com • +1-952-938-8080 • 1-800-366-3891
LoopStar
®

Metro 3600
SONET Multi-Service Transmission Platform
Description Catalog Number
8 Port OC-3 optical interface unit, requires SFP optics LPS-OC30
4 Port OC-3 optical interface unit hardened configurable, requires SFP optics LPS-OC3AH
4xOC-3 optical interface unit LPS-OC3Q0x
2xOC-3 optical interface unit LPS-OC3D0x
OC-3 optical interface unit LPS-OC30x
2x1000Base-FX ethernet board (transparent, without GE SFP module) LPS-EGT2H
8x100Base-T ethernet board LPS-EFS8
1GE-FX + 4X10/100Base-T switched ethernet (LS800/1600 only) LPS-ET4GS
4 Port FX fast ethernet LPS-ELS4/H
28xDS-1 mapper board LPS-PDT102
28xDS1 mapper protection LPS-PDT1P02
6xDS-3 mapper board (transmux) LPS-PDM3D2H
6 port DS3 transmux/remote test protection unit LPS-PDM3P01/H
12xDS3/STS1 mapper unit LPS-PQT3A01/H
12xDS-3 mapper board LPS-PQT301x
12xDS3 mapper protection LPS-PQT3P01
12xDS3/STS1 mapper protection unit LPS-PQT3B
Faceplate front (for XCS slot) LPS-XFF
56xDS1 electrical interface board (right side) LPS-PQI1R
56xDS1 electrical interface board (left side) LPS-PQI1L
48xDS3 electrical interface board (BNC – left side) LPS-PHI3A
48xDS3 electrical interface board (BNC – right side) LPS-PHI3B
48xDS3 electrical interface board (MINI-BNC – left side) LPS-PHI13C
48xDS3 electrical interface board (MINI BNC – right side) LPS-PHI13D
Faceplate rear for 3600 LPS-BFA
Note: x = 1, 2, 3 (where 1 = 15 km, 2 = 40 km, 3 = 60 km)
*Contact customer service for correct part numbers for SFP and specic wavelengths

Ordering Information
4/08 • 102494AE
Wireline Service Delivery Products for North America
11
www.adc.com • +1-952-938-8080 • 1-800-366-3891
For Ethernet services to fully deliver on the
promise of lower costs and higher reliability,
remote management of the network becomes
essential—especially as subscriber numbers
increase. Remote isolation of troubles and
performance monitoring are minimum
requirements for carrier-class Ethernet service.
Service providers can now create an intelligent
Ethernet management platform with ADC’s
Ethernet Network Interface Unit (ENIU). Installed
at the remote premise, the ENIU provides the
demarcation point between the customer and carrier network. By providing the ability to sectionalize
the network at the customer interface, the ENIU enables the carrier to remotely assess whether trouble
conditions reside within the carrier or customer network.
Benefits
Saves operations time by limiting technician dispatch for troubleshooting and turn-up.•
Reduces network downtime through proactive network management by remote access for testing and •
performance monitoring.
Enables quicker service restoration through single end testing of signal.•
Increases network availability by accelerating network trouble repair cycle.•
Easily integrates Ethernet network management into existing operations by mirroring current maintenance •
practices for DS1/DS3 architectures.
Standards-based solution allows interoperability with switches, routers and test equipment.•
Features
Supports in-band remote signal loopback for troubleshooting and testing as well as remote failure •

indications and link monitoring for checking service performance.
Features UTP (RJ45) or SPF-based optical connectors for customer and carrier interface. •
Loss of power “cut through” ensures that electrical signal integrity is maintained on RJ45 interfaces if •
power to the unit is lost.
Congurable to 10Mbps or 100Mbps Ethernet or Gigabit Ethernet on carrier and customer demarcation •
sides.
Allows bandwidth allocation in 1 Mb increments.•
•
Includes enclosed carrier-side interfaces with LED performance indicators on the front of the unit.
Fully compliant with IEEE 802.3ah™ First Mile standards for OAM.•
Accepts –48Vdc or AC power.•
Metro Ethernet
Ethernet Network Interface Unit: Intelligent Ethernet Management Platform
Ordering Information
Description Catalog Number
Ethernet Network Interface Unit
10/100/1000 Mbps UTP to UTP ENI-EGXXEGXX1A
10/100/1000 Mbps UTP to UTP - AC Power ENI-EGXXEGXX1A-AC
4/08 • 102494AE
Wireline Service Delivery Products for North America
12
www.adc.com • +1-952-938-8080 • 1-800-366-3891
The ADC OptEnet
™
optical extension platform is a carrier-class, intelligent, scalable platform capable
of handling any network’s Ethernet or SONET media transitions. Bridging the gap between legacy
copper infrastructures and fiber growth, the OptEnet platform provides the most economical evolution
path. Integrated intelligence allows the user to remotely monitor system performance and transmit
alarm conditions to upstream operational support systems. Leveraging ADC’s leadership in connectivity
solutions, the OptEnet platform provides the ideal solution for Ethernet extensions in support of

transparent LAN services or switch router interconnect requirements. A variety of solutions are supported
ranging from 10Mb/s Ethernet, OC-12 and Gigabit Ethernet.
Features
Modular design enables line card diversity within the same chassis•
Extend central ofce interconnect between network elements when distances are greater than 100 meters•
Ethernet delivery solution from central ofce to customer premises•
Reduce capital expenses associated with expensive optical line cards in network elements•
Auto-negotiation features eliminate the need for optical line card upgrade in network elements•
Redundant -48Vdc and +24Vdc power supplies•
Supports SNMP, TL1 and Telnet communication protocols•
Daisy-chain communication interfaces•
Supports 10Base-T, 100Base-TX and 1000Base-T UTP conversion to ber•
Multimode ber to singlemode ber conversions•
Medium Dependent Interface Cross-over (MDI-X) eliminates network collisions•
NEBS Level 3, CE, UL and FCC standards compliant•
Metro Ethernet
OptEnet
™
Optical Extension Platform
4/08 • 102494AE
Wireline Service Delivery Products for North America
13
www.adc.com • +1-952-938-8080 • 1-800-366-3891
OptEnet 4-Port Modular Chassis
OptEnet
™
Modular Chassis
The OptEnet chassis is a modular chassis, which enables multiple types of line cards deployed
simultaneously within the same chassis.
Power Supply Modules

The OptEnet chassis accepts power from DC sources. Dual power supplies are deployed within the
chassis to provide redundant power to all line cards along the back plane.
Features
Supports up to 12 OptEnet line cards in two rack units•
Supports up to 4 OptEnet line cards in one rack unit•
Accepts dual redundant power supplies•
19 inches wide with 23-inch reverse mounting ears•
Optional SNMP, TL1 and/or alarm functionality•
Features
-48Vdc (50 W and 100 W) power supply versions•
+24Vdc (100 W) power supply•
Extended temperature versions available•
Power connection on the front panel•
Power and temperature status LEDs•
Metro Ethernet
OptEnet
™
Optical Extension Platform
Ordering Information
Description Catalog Number
Chassis, rack mount, 1U,4-Port, N+1 power, CPU capable ADCCE1000A
Chassis, rack mount, 1U,4-Port, AC powered, 4-Port, CPU capable ADCCE1020A
Chassis, rack mount, 2U,12-Port, N+1 power, CPU capable ADCCE1100A
Chassis, rack mount, 2U,4-Port, AC powered, 14-Port ADCCE1400A
Ordering Information
Description Catalog Number
OptEnet +24Vdc power supply module ADCCE2200A
OptEnet -48Vdc power supply module (100 W) - extended temperature ADCCE2400A
OptEnet -48Vdc power supply module (100 W) – standard temperature ADCCE2410A
OptEnet -48Vdc power supply module (50 W) – extended temperature ADCCE2450A

OptEnet -48Vdc power supply module (100 W) – standard temperature, 14-port shell ADCCE2440A
2RU AC power supply ADCCE2600A
OptEnet 12-Port Modular Chassis
OptEnet DC Power
Supply Module
4/08 • 102494AE
Wireline Service Delivery Products for North America
14
www.adc.com • +1-952-938-8080 • 1-800-366-3891
If remote monitoring is required, a central processor unit (CPU) can be deployed within the OptEnet
™

platform. An alarm card is available if only local alarm indications are required. The CPU and alarm card
are optional. Only one of the two modules can be deployed in the chassis, so the network administrator
must determine which alarm notification method is preferable.
OptEnet
™
Optical Extension Platform
Communications Modules
CPU Features
Serial and Ethernet interface•
SNMP, TL1 and Telnet communications protocols•
Compatible with all SNMP management platforms•
Daisy-chain up to four units, via one IP address•
Firmware upgrade via TFTP or serial•
Five simultaneous Telnet sessions•
Alarm Card Features
Normally open and normally closed alarm contacts•
Specifications
CONSTRUCTION CHARACTERISTICS

CPU
Ethernet Interface: 10Base-T, RJ45 connector
COM IN Interface: RS-232 DCE, RJ45 connector
COM OUT Interface: RS-232 DTE, RJ45 connector
Communications Protocol: SNMP, TL1 and ASCII
ALARM MODULE
Power ON Indicator: Green
Alarm Indicator: Red
Contact Closures: Normally open and normally closed
Ordering Information
Description Catalog Number
CPU-SNMP module ADCCE3000A
Alarm module ADCCE3100A
Alarm cable assembly ADCCA3101A
OptEnet
CPU
OptEnet
Alarm Module
4/08 • 102494AE
Wireline Service Delivery Products for North America
15
www.adc.com • +1-952-938-8080 • 1-800-366-3891
OptEnet
™
Optical Extension Platform
Singlemode to Singlemode Optical Regeneration Line Card
The OptEnet
™
singlemode to singlemode optical regeneration line card is one of a family of line cards
that can be deployed in the OptEnet modular chassis. The card is designed to regenerate optical signals

transported over a singlemode link. The card supports any protocol and data rate between 10 Mb/s to
2.488 Gb/s (OC-48)
Features
Single circuit line card•
Duplex transmission•
Link status and power LED indications•
SFP Optical Interfaces•
Protocol independent•
Supports data rates 10 Mb/s to 2.488 Gb/s•
Specifications
ELECTRICAL
Input Power: 1.3 Watts maximum; normal operation
PHYSICAL
Chassis Compatibility: OptEnet modular chassis
Fiber Optic Connectors: LC (SFP module)
Dimensions (HxWxD): 2.89 cm x 20.5 cm x 18.8 cm (1.14“ x 8.07“ x 7.4“)
Weight: 122 g (0.27 lbs)
OPTICAL PERFORMANCE
Ordering Information
Description Catalog Number
Optical converter, SMF1310FPL-MMF1310LED, 10-622 Mbps, SC-SC, STD. temp ADCPE6000A
Optical converter, SMF1310FPL-MMF1310LED, 10-622 Mbps, SC-SC, EXT. temp ADCPE6001A
Optical converter, SMF1310FPL-SMF1310FPL, 2.488Gbps, LC-LC, 15km reach ADCPE6515A
Optical converter, SMF1310FPL-SMF1310FPL, 2.488Gbps, LC-LC, 40km reach ADCPE6540A
Optical converter, no SFP ADCPE6500A
OptEnet Singlemode
to Singlemode Optical
Converter Module
Singlemode –15 km Range Singlemode – 40 km Range
Wavelength:

1260 to 1360 nm range 1280 to 1335 nm range
Output Optical
Power (XMT):
-5 dBm minimum
0 dBm maximum
-2 dBm minimum
3 dBm maximum
Input Optical
Power (RCV):
-18 dBm minimum
0 dBm maximum
-27 dBm minimum
-9 dBm maximum
4/08 • 102494AE
Wireline Service Delivery Products for North America
16
www.adc.com • +1-952-938-8080 • 1-800-366-3891
OptEnet
™
Optical Extension Platform
Gigabit Ethernet Line Card
The OptEnet 1000Mb/s media converter line card is designed to convert optical signals to electrical
signals. The card supports 1000BASE-T data rates over UTP and singlemode or multimode fiber.
Supported Protocols
Features
Supports Gigabit Ethernet•
Full duplex transmission (transmit and receive)•
Ethernet and ber optic link indicators•
MDI-X – Auto-detects and corrects cross-over•
Specifications

ELECTRICAL
Input Power: 2.2 Watts maximum; normal operation
PHYSICAL
Chassis Compatibility: OptEnet modular chassis
Fiber Optic Connectors: SC
Dimensions (HxWxD): 1.14" x 8.07" x 7.4" (2.89 x 20.5 x 18.8 cm)
Weight: 0.27 lbs (122 g)
Electrical Interface: RJ45
Optical Interface: SC
OPTICAL PERFORMANCE
Ordering Information
Description Catalog Number
1000Base-SX, RJ-45, 850-nm, VCSEL, SC (GR-1089 intra-ofce surge compliant) ADCPE5000A
1000Base-LX, RJ-45, 1310-nm, FP laser, SC (GR-1089 intra-ofce surge compliant) ADCPE5100A
OptEnet 1000Base-LX Line
Card
1000Base-LX 1000Base-SX
Wavelength:
1270 to 1355 nm range 830 to 870 nm range
Output Optical
Power (XMT):
-11 dBm minimum
-3 dBm maximum
-9.5 dBm minimum
4 dBm maximum
Input Optical
Power (RCV):
-22 dBm minimum
-20 dBm maximum
-17 dBm minimum

-3 dBm maximum
Application Data Rate Media Distance Interface
1000Base-T 1000Mb/s UTP Category 5e (4-pair) 328 feet (100 m) RJ45
1000Base-LX 1000Mb/s 1300 nm singlemode ber 6.2 miles (10 km) (8/125µm) SC
1000Base-SX 1000Mb/s 850 nm multimode ber 1804 feet (550m) SC
4/08 • 102494AE
Wireline Service Delivery Products for North America
17
www.adc.com • +1-952-938-8080 • 1-800-366-3891
OptEnet
™
Optical Extension Platform
10/100 Mb/s Optical Ethernet Conversion Line Card
The OptEnet 10/100 Mb/s optical Ethernet conversion line cards are designed to convert optical signals
to electrical signals. The line cards have an auto negotiation feature allowing them to detect and
synchronize with either a 10Base-T or 100Base-TX signal. The cards support 10Base-T and 100Base-T
data rates over UTP and singlemode or multimode fiber.
Supported Protocols
Features
Supports 10Base-T, and 100Base-TX•
Full and half duplex transmission (transmit and receive)•
Ethernet and ber optic link indicators•
Auto negotiation over ber and copper (ANSI/TIA 785)•
MDI-X – Auto-detects and corrects cross-over•
OptEnet 100Base-LX
Ethernet Line Card
Application Data Rate Media Distance Interface
10Base-T 10 Mb/s UTP Category 3, 4 or 5 (2-pair) 100 m (328 feet) RJ45
100Base-TX 100 Mb/s UTP Category 5 (2-pair) 100 m (328 feet) RJ45
100Base-LX 10/100 Mb/s 1300 nm singlemode ber 15 km (9.3 miles) SC

100Base-LX 10/100 Mb/s 1800 nm singlemode ber 40 km (24.8 miles) SC
100Base-SX 10/100 Mb/s 850 nm multimode ber 300 m (984 feet) SC
100Base-FX 10/100 Mb/s 1310 nm multimode ber 2 km (2562 feet) SC
4/08 • 102494AE
Wireline Service Delivery Products for North America
18
www.adc.com • +1-952-938-8080 • 1-800-366-3891
OptEnet
™
Optical Extension Platform
10/100 Mb/s Optical Ethernet Conversion Line Card
Specifications
ELECTRICAL
Input Power: 1.75 Watts maximum; normal operation
PHYSICAL
Chassis Compatibility: OptEnet modular chassis
Fiber Optic Connectors: SC
Dimensions (HxWxD): 2.89 cm x 20.5 cm x 18.8 cm (1.14“ x 8.07“ x 7.4“)
Weight: 122 g (0.27 lbs)
Electrical Interface: RJ45
Optical Interface: SC
OPTICAL PERFORMANCE
Ordering Information
Description Catalog Number
100Base-SX, 850-nm, LED, SC (GR-1089 intra-ofce surge compliant) ADCPE4000A
100Base-LX, 1310-nm, FP laser, SC (GR-1089 intra-ofce surge compliant) ADCPE4200A
100Base-LH, 1310-nm, FP laser, SC, 40KM (GR-1089 intra-ofce surge compliant) ADCPE4240A
100Base-FX, 1310-nm, LED, SC (GR-1089 intra-ofce surge compliant) ADCPE4400A
100Base-LX
(Singlemode)

15 km
100Base-LX
(Singlemode)
40 km

100Base-SX
(Multimode)

100Base-FX
(Multimode)
Wavelength:
1270 to 1380 nm
range
1270 to 1355 nm
range
830 to 870 nm
range
1270 to 1380 nm
range
Output Optical
Power (XMT):
-15 dBm minimum
-8 dBm maximum
-8 dBm minimum
-2 dBm maximum
-17 dBm minimum
-12 dBm maximum
-19 dBm minimum
-14 dBm maximum
Input Optical

Power (RCV):
-31 dBm minimum
-7 dBm maximum
-34 dBm minimum
-7 dBm maximum
-26 dBm minimum
-12 dBm maximum
-32 dBm minimum
-11 dBm maximun
4/08 • 102494AE
Wireline Service Delivery Products for North America
19
www.adc.com • +1-952-938-8080 • 1-800-366-3891
The OptEnet Optical Extension platform has expanded to include a single-mount solution, which can be
positioned on a desktop or wall. The unit can be deployed as the remote termination device linked to
the OptEnet modular platform or in a single-circuit, point-to-point configuration. The device converts
standards-based electrical Ethernet signals to fiber, enabling cost-effective, flexible Ethernet extensions
across a wide area or local area network (WAN or LAN).
Enabling network planners to bridge the gap between legacy copper infrastructure and new fiber plants,
the OptEnet platform maximizes the distance and quality benefits of fiber in a high quality, standards-
based solution. A variety of data interfaces are supported ranging from 10Mb/s Ethernet to OC-12 to
Gigabit Ethernet.
OptEnet
™
Platform
Single-Mount Solution
Features
Extends Ethernet signal beyond the 100 meter limitation of Unshielded Twisted Pair (UTP)•
Provides cost-effective Ethernet point-to-point solutions•
Reduces capital expense of optical network element line cards in low-density applications•

Supports 10Base-T, 100Base-Tx and 1000Base-T conversions to ber•
Enables multimode to singlemode conversions for data rates 10Mb/s to 622Mb/s•
Features UTP and ber optic link status indicators on front panels•
Supports desktop or wall mount deployment•
Includes AC or –48Vdc power options•
4/08 • 102494AE
Wireline Service Delivery Products for North America
20
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Optical Extensions
The OptEnet single-mount solution incorporates the same functional line cards as those deployed in
the OptEnet modular platform. The line card ships enclosed in the single position housing to minimize
installation time and provide a plug-and-play solution.
Ethernet Extensions
Optical Conversions
OptEnet
™
Platform
Single-Mount Solution
Data
Rate
Electrical
Interface Distance Optical Interface Distance Catalog Number
10/100Mbps UTP Category 5 328 feet (100m) 850nm multimode ber 984 feet (300m) ADCST4000A-xx
10/100Mbps UTP Category 5 328 feet (100m) 1310nm singlemode ber 9.3 miles (15km) ADCST4200A-xx
10/100Mbps UTP Category 5 328 feet (100m) 1310nm multimode ber 6562 feet (2000m) ADCST4400A-xx
1000Mbps UTP Category 5e 328 feet (100m) 850nm multimode ber 1804 feet (550m) ADCST5000A-xx
1000Mbps UTP Category 5e 328 feet (100m) 1310nm singlemode ber 6.2 miles (10km) ADCST5100A-xx
"xx" – indicates the powering option selected: "AC" = AC power; "48" = -48Vdc.
Data

Rate
Multimode
Optical
Interface

Distance
Singlemode
Optical
Interface

Distance Catalog Number
10/622Mbps 1310nm 1620 feet (500m) 1310nm 9.3 miles (15km) ADCST6000A-xx/
ADCST6001A-xx
4/08 • 102494AE
Wireline Service Delivery Products for North America
21
www.adc.com • +1-952-938-8080 • 1-800-366-3891
OptEnet
™
Platform
Single-Mount Solution
Specifications
MECHANICAL
Fiber Optic Connectors: SC
Electrical (UTP) Connector: RJ45
Dimensions (HxWxD): 1.6" x 4.3"x 7.8" (4.1 x 10.9 x 19.8 cm)
Weight: 1.7 lbs
POWER
DC Power: -48 Vdc (Input power module specific, ranging from 1.75 to 2.7 watts)
Dimensions (HxWxD): Unviersal AC Inputs

OPTICAL CONVERSION LINE CARD Singlemode Multimode
Wavelength: 1274 to 1256 nm 1270 to 1380nm
Output Optical Power (XMT): -15 dBm minimum -20 dBm minimum
-8 dBm maximum -14 dBm maximum
Input Optical Power (RCV): -26 dBm minimum -32 dBm minimum
-8 dBm maximum -14 dBm maximum
10/100 MB/S OPTICAL
ETHERNET CONVERSION 100BASE LX 100BASE-SX 100BASE-FX
Fiber: Singlemode Multimode Multimode
Wavelength: 1270 to 1380 nm 830 to 870nm 1270 to 1380nm
Output Optical Power (XMT): -15 dBm minimum -17 dBm minimum -19 dBm minimum
-8 dBm maximum -12 dBm maximum -14 dBm maximum
Input Optical Power (RCV): -32 dBm minimum -26 dBm minimum -32 dBm minimum
-8 dBm maximum -12 dBm maximum -11 dBm maximum
10/100 MB/S OPTICAL
ETHERNET CONVERSION 1000BASE LX 1000BASE-SX
Fiber: Singlemode Multimode
Wavelength: 1274 to 1256 nm 1270 to 1380nm
Output Optical Power (XMT): -15 dBm minimum -20 dBm minimum
-8 dBm maximum -14 dBm maximum
Input Optical Power (RCV): -26 dBm minimum -32 dBm minimum
-8 dBm maximum -14 dBm maximum