Hướng dẫn vận hành cơ bản máy mounter NPM
Bạn đang xem bản rút gọn của tài liệu. Xem và tải ngay bản đầy đủ của tài liệu tại đây (3.94 MB, 23 trang )
2
Màn hình home
PANASONIC VIETNAM FACTORY AUTOMATION
4
3
2
1
3
Machine adjust
PANASONIC VIETNAM FACTORY AUTOMATION
7
6
5
4
Press here to closing of the engineer mode
The NPM machine put for the engineer mode
Press here to changing of the engineer mode
The NPM machine put for the operator mode
PANASONIC VIETNAM FACTORY AUTOMATION
4
3
2
1
2
1
I : MÀN HÌNH HOME / HOME MODE
`
3
4
5
PANASONIC VIETNAM FACTORY AUTOMATION
Press together ENABLING and START for production
II : PRODUCTION MODE
6
Press here and choice Select to insert components of tape feeder
Press here and choice Select to insert components of Tray
Press here and choice Select only 1 head to insert
Press here to delete all selection
2
3
4
5
PANASONIC VIETNAM FACTORY AUTOMATION
Press here and choice Select to insert components of the block of PCB
1
5
4
3
2
1
7
Press OK when the machine take a message
Press here return first mode
2
3
PANASONIC VIETNAM FACTORY AUTOMATION
Press here and choice Simulation mode
1
1
3
2
8
PANASONIC VIETNAM FACTORY AUTOMATION
D
G
A
B
C
F
E
Download the program from DGS or SD card
Delete program data on the machine
G
Download the program to the machine or the line
F
E
Loading the Production Data.
Displays the work progress or setting.
C
D
Displays the user name of the operator mode
Displays the start date of the operation
B
A
III : ARRANGE MODE
9
PANASONIC VIETNAM FACTORY AUTOMATION
99
1
7
8
3
2
4
6
55
9
8
7
6
5
4
3
2
1
Opens or closes the shutter of the nozzle changer.
The measurement value screen is displayed.
The measurement image screen is displayed
Check dusty adhesion of the nozzle
Recognizes the dimensions nozzle attached to the head
The head recognition angle
Takes the nozzles to attach the head base.
Returns the nozzles attached to the head to nozzle changer
The display are the nozzle and changer position
10
4
5
PANASONIC VIETNAM FACTORY AUTOMATION
3
1
6
E
A B C D
2
E
D
C
B
A
6
5
4
3
2
1
Teach again for position pickup components.
Displays the feeder origin.
Learning value Z : Unuse.
Displays the pickup position co-ordinate of Y-axis.
Displays the pickup position co-ordinate of X-axis.
Displays feed pitch, width, and kind of the feeder.
Displays the component name..
Displays ID number of the part if stock is available.
Displays position and side feeders are arranged
Displays the number of feeders to skip..
Displays the total number of feeders arrangement.
11
PANASONIC VIETNAM FACTORY AUTOMATION
2 3
1
4
C
B
A
5
C
B
A
5
4
3
2
1
Moves the head to the nozzle changer exchangeable position.
Completion to the changing pin
Starting to the changing pin
Reset parts information at a selected feeder
Reset parts information of all the feeders.
Displays the tape width
Displays a feed pitch in tape feed.
The feeders that are arranged in the production data and that are
used for production are displayed in blue not used for actual
production are displayed in yellow and green.
12
3
Display the number of board have producted already
Display how many parts necessary for the set production count.
Set production count
Set production mode, If ON mode when the machine product enough prodution count then the machine will stop
PANASONIC VIETNAM FACTORY AUTOMATION
4
3
2
1
4
2
1
13
4
Total time of operation time + preparation time
Clears the production information.
saves the production information in a SD card.
The number of patterns produced
The number of finished boards+ the number of boards passed through
PANASONIC VIETNAM FACTORY AUTOMATION
5
4
3
2
1
3
2
1
5
IV: PRODUCION INFORMATION AND RUNNING INFORMATION
14
PANASONIC VIETNAM FACTORY AUTOMATION
A
1
2
D
C
B
3
D
C
B
A
3
2
1
Save error to SD card
Display axis Information
Display error detail
Display date, time, error content
Display the number of error rate of parts pick up
Display the number of error of parts pick up
Display the number of parts pick up already
15
Press here to see maintenance items already
Press here to reset maintenance items already
2
3
PANASONIC VIETNAM FACTORY AUTOMATION
Press here to see more detail for maintenance items
1
1
3
2
4
5
c
c
c
PANASONIC VIETNAM FACTORY AUTOMATION
3
c
16
2
c
6
1
c
6
5
4
3
2
1
Display result when calibration and CPK the machine
Open or close shutter
Continue more action
Return the machine to origin
Change maintenance position
Return maintenance position machine
PANASONIC VIETNAM FACTORY AUTOMATION
c
17
c
c
2
3
5
1
4
c
VI: PRODUCTION DATA
c
c
c
Bad co-ordinate marking on PCB
3
5
Safety mode for both model
Speed changing of conveyor
Using for changing XY co-ordinates
2
4
Dimension length, with and thickness of PCB
1
18
PANASONIC VIETNAM FACTORY AUTOMATION
c
3
c
1
2
3
2
1
Set pass mode or mount components
Search component position
Skip component not insert to PCB
PANASONIC VIETNAM FACTORY AUTOMATION
c
19
c
Select the part to be recognized.
Press PartsSelect to chose component recognition
20
PANASONIC VIETNAM FACTORY AUTOMATION
c
c
Press "Recog" to start recognizing the part.
Press "Set" to decide the pickup condition.
PANASONIC VIETNAM FACTORY AUTOMATION
c
21
c
VII: MACHINE ADJUST
c
c
Press " Input confirm" và "Output confirm" to
check machine conditional
tra
Press "Axis info" view coordinates
information
Press "Start" return the machine to origin
c
PANASONIC VIETNAM FACTORY AUTOMATION
c
22
c
Press "Action check" to check one by one of
nozzle on head
Press "Action check" to check air conditional
of nozzle on head
Press "Nozzle exch." to change nozzle
23
PANASONIC VIETNAM FACTORY AUTOMATION
c
Press "Bad head" to skip nozzle when nozzle
not good
