Logo Usage Guidelines
Bạn đang xem bản rút gọn của tài liệu. Xem và tải ngay bản đầy đủ của tài liệu tại đây (432.64 KB, 10 trang )
Created January 2004
Logo Usage Guidelines
I WatchGuard
®
Firebox
®
X Logo Guidelines
WatchGuard
®
Firebox
®
X Logo may be used only:
In connection with the Firebox X appliance only, a WatchGuard licensed product. It should not be applied to other
WatchGuard Products, or used in lieu of the WatchGuard logo, on WatchGuard Corporate pieces.
By WatchGuard channel partners/alliance partners for the sole purpose of identifying themselves as members of
WatchGuard’s channel/alliance organizations. WatchGuard’s channel/alliance organizations may use the WatchGuard
product and partner/alliance logos for their advertising and promotional materials while a member in good standing,
subject to the terms and conditions of the applicable program or contractual agreement.
Using the WatchGuard
®
Firebox
®
X Logo on Marketing Materials
Product Information Sheets and Brochures
The Firebox X logo must appear in product brochures and product datasheets that pertain directly to the Firebox X
appliance, a WatchGuard licensed product.
Product Advertising
The Firebox X logo must appear in product advertising that pertain directly to the Firebox X appliance, a WatchGuard
licensed product.
Point-of-Purchase Displays and Tradeshow Signage
The Firebox X logo must appear in signage and POP that pertain directly to the Firebox X appliance, a WatchGuard
licensed product.
Using the WatchGuard
®
Firebox
®
X Logo on the Internet
Online Product pages or e-commerce sites
If you are a WatchGuard channel partner/alliance partner, the Firebox X logo must appear on any of the pages describing
the Firebox X product line, in the title only.
4 Color process Element Color
50% black
100% black
100m/100y > 50m/100y gradient
100m/100y
100m/100y > 50m/100y gradient
2 Color spot Element Color
50% black
100% black
100% pms 485
20% black
reverse to white
100% pms 485
Black & White Element Color
50% black
100% black
50% black
20% black
reverse to white
20% black
20% black
reverse to white
100m/100y > 50m/100y gradient
I I WatchGuard
®
Firebox
®
X Logo Guidelines
Color Usage
Clear Space
A minimum amount of clear space of at least 1/8 the width of the entire logo must be maintained between the logo and other
elements in order to preserve the integrity.
I I I WatchGuard
®
Firebox
®
X Logo Guidelines
= 1/8 of the full logo size
Minimum Logo Size
The Firebox X logo must be sized so it is readable in its entirety. The minimum allowable size for the logo is outlined below. The
Firebox X logo should be used only on Firebox X subject matter, and it must have dominance over the corporate WatchGuard logo.
If the subject matter is the WatchGuard Corporation, then the WG logo should be utilized, sans the Firebox X logo. Once the above
has been established, the logo should only be used in Title area’s, not in Subheads or bodycopy.
IV WatchGuard
®
Firebox
®
X Logo Guidelines
For Print:
Minimum height size = .50 inches | 36 points | 1.27 centimeters
.50 inches
aligned with bottom of stylized "X"
aligned with top of "W"
For Web:
Minimum height size = 40 pixels | .556 inches | 40 points | 1.41 centimeters
40 pixels
aligned with top of "W"
aligned with bottom of stylized "X"
