CG2-500
2V 500Ah(10hr)
Gel battery shows some distinctive advantages over flooded battery or AGM battery,
such as super thermal stability, high deep discharge capability, good recovery from
deep discharge , even if the battery is left discharged for three days, it will recover
to 100% of capacity. With the above-mentioned advantages, the gel battery has
long service life, specially suitable for motive power applications, such as golf trailer,
sruubber, folklift,etc.The deep discharge cycles increased 50% as compared with
the AGM battery.
Battery Construction
Component
Positive plate
Negative plate
Container
Cover
Safety valve
Terminal
Raw material
Lead dioxide
Lead
ABS
ABS
Rubber
Copper
General Features
● Nanometer SiO 2 and H 2 SO 4 gelled
electrolyte technology for efficiency
gas recombination of up to 99% and
freedom from electrolyte maintenance
or water adding.
● Not restricted for air transport-complies
with IATA/ICAO Special Provision A67.
● UL-recognized component.
● Can be mounted in any orientation.
● Computer designed lead, calcium tin alloy
grid for high power density.
● Long service life, float or cyclic
applications.
● Maintenance-free operation.
● Low self discharge.
● Case and cover avaiable in both standard
and flame restardant ABS.
Dimensions and Weight
Length(mm / inch)
Width(mm / inch)
Height(mm / inch)
Total Height(mm / inch)
Approx. Weight(Kg / lbs)
242 / 9.53
173 / 6.81
330 / 13.0
365 / 14.4
31 / 68.4
Separator
PVC
Electrolyte
Gelled acid
Performance Characteristics
Nominal Voltage
2V
Number of cell
1
Design Life
20 years
Nominal Capacity 77oF(25oC)
10 hour rate (50.0A, 1.80V)
500Ah
5 hour rate (88.0A, 1.75V)
440Ah
1 hour rate (310A, 1.60V)
310Ah
Internal Resistance
≤ 0.70mOhms
Fully Charged battery 77oF(25oC)
Self-Discharge
2% of capacity declined per month at 20oC(average)
Operating Temperature Range
Discharge
-20~60oC
Charge
-10~60oC
Storage
-20~60oC
1800A(5s)
Max. Discharge Current 77oF(25oC)
Charge Methods: Constant Voltage Charge 77oF(25oC)
Cycle use Charge Voltage:
2.40-2.45VPC
Maximum charging current
100A
-5mV/ oC
Temperature compensation
Standby use
2.20-2.30VPC
-3.3mV/ oC
Temperature compensation
* Weight deviation: ± 3%
Discharge Constant Current (Amperes at 77oF25oC)
End point
10min 15min 30min
volts/cell
1.60V
1050 860
500
1.65V
990
800
490
1.70V
930
760
480
1.75V
870
700
470
1.80V
810
640
450
1h
3h
5h
10h
20h
310
300
290
280
265
130
127
123
122
117
95.0
92.0
90.0
88.0
85.0
52.5
52.0
51.0
50.5
50.0
28.0
27.5
27.0
26.8
26.3
Discharge Constant Power (Watts at 77oF25oC)
+
-
Total height with removeable cover: 365
End point
volts/cell
1.60V
1.65V
1.70V
1.75V
1.80V
10min 15min 30min
1798
1711
1667
1587
1503
1459
1446
1386
1299
1229
936
894
852
827
792
1h
3h
5h
10h
20h
580
552
529
511
488
243
231
219
208
196
182
172
164
161
150
102
92.4
90.6
87.3
81.6
55.1
51.9
49.7
47.9
46.2
(Note)The above characteristics data are average values obtained within
three charge/discharge cycles not the mimimum values.
All data shall be changed without notice,Vision reserves the right to explain
and update the information contained hereinto.
page1 of 2
www.vision-batt.com
CG2-500
O
0.17
2.40
100
0.14
2.20
50A
500A 310A
80
60
40
Discharge
2.00
0.11
100%(0.1CAx10H)
---- 50%(0.1CAx5H)
Charge
Charge Voltage(2.45V/Cell)
Charge Current 0.1CA
o
Temperature25 C
1.80
0.08
1.60
0.05
1.40
0.02
20
)Ratio
Voltage(V)/PerCell
1050A
120
ChargeCurrent(CA)
122A 88A
Charging characteristic for Cycle use
Charged Volume(%)
Battery voltage(V)
Discharge characteristic (25 C)
0
4
Discharge time
12
16
20
24
Self-discharge characteristic
110
(V/CELL)
100
Capacity(%)
(V/6V)
(V/4V)
(V/8V)
8
Charging time (hours)
Relationship between
charging voltage and temperature
(V/12V)
2V 500Ah
90
15.6
10.4
7.8
5.2
2.6
15.0
10.0
7.5
5.0
2.5
14.4
9.6
7.2
4.8
2.4
13.8
9.2
6.9
4.6
2.3
60
13.2
8.8
6.6
4.4
2.2
50
-10
0
10
20
30
40
50
80
70
40
60
Ambient temperature( oC)
0
3
6
9
12
15
18
21
Storage time: months
24
27
30
Cycle service life in relation to
depth of discharge
Capacity(%)
Life characteristics of Standby use
50% Depth of discharge
Life(year)
Number of cycles(cycles)
Temperature effects on capacity
Capacity (%)
Life(years)
Temperature effects on float life
Temperature( oC)
THE INTERNATIONAL CERTIFICATION NETWORK
ISO9001:2008
MH25860
G4M19906-9202-E-16
www.vision-batt.com
Shenzhen Center Power Tech. Co., Ltd.
Center Power Industrial Park, Tongfu Industrial District Dapeng Town, 518120 Shenzhen, China
Tel: (+86-755) 8431 8088 Fax: (+86-755) 8431 8038 E-mail:
Copy Right Shenzhen Center Power Technology Co., Ltd (Edition 2014-1)
Page 2 of 2