8600 Smart Routers
Hardware Installation Guide
76.8600-40039M
29.07.2015


Document Information

Revision History
Document No.

Date

Description of Changes

76.8600-40039M

29.07.2015

Warning added to the 8660 Smart Router R1 Fan Module
Upgrade Kit
CFP2 transceivers specifications and installation instructions
added in 9.6 CFP2 Used in 8600 System.
Updates applied in 9.8 Installation of Pluggable Transceivers .
Added the support of 8665 Smart Router and 8615 Smart Router
stacked.
Added: 3.1 8665 Smart Router Subrack Installation, 3.3.1 8615
Smart Router Stacked Installation, 7 8665 Smart Router LU1
and SU1 Installation.
Reworked 14.1 ESW Shutdown Operation.
Information about replacing an IFC1 added in 14.3 Replacing

CDC, SCM or Line Cards.

76.8600-40039L

03.11.2014

8615 Smart Router added.
Chapter 2 Interface Numbering and Legal Modules added.
Chapter 9.7 GNSS SFP added.
81.86T-SM3TX01Q-R6 and 81.86T-SM3TX02R-R6 SFPs
added to chapter 9.3 SFPs Used in 8600 System.
Note regarding electrical SFPs added to 9.2 Electrical
Transceivers.
Addition on circuit breaker in 12.1 8602 Smart Router Power
Installation.
Changes to the document structure.

8600 Smart Routers
Hardware Installation Guide
2

76.8600-40039M
© 2015 Coriant.


Document No.

Date

Description of Changes


76.8600-40039K

04.06.2014

8602 Smart Router added.
GNSS SFP added in 10 Installation of GNSS SFP.

76.8600-40039J

27.03.2014

Related documentation updated in 8600 Smart Routers Technical
Documentation.
AC power installation note added to chapter Safety Notes.
CDC2 control card data added and corresponding changes
applied in 8.3 8630 Smart Router and 8660 Smart Router Line
Card and CDC Assembly with New Captive Screws and New
Ejector Levers, 11 Grounding, Appendix: Site Survey.
Added hot insertion of line modules and corresponding updates
applied in 14.5.5 Replacing Line Module Supporting Hot
Insertion with Different Typeand 14.5.6 Adding Line Module
Supporting Hot Insertion to an Empty Slot.
Chapter 13.6 Communication Link Cabling restructured and
updated.
Added support of 1x10GBASE-R HM and updates made in
6.3 8609 Smart Router and 8611 Smart Router Physical Line
Module Installation and 13.3 Optical Cabling.
ELC1 and 8x100/1000BASE-X R2 IFM electrical 1000BASE-T
SFP update in chapter 9.3 SFPs Used in 8600 System.

8611 Smart Router XFP support updated in chapter 9.5 XFP
Used in 8600 System.
Chapter 8.1 Upgrading Power Feeding of 8660 Smart Router R2
from Protected CDC Feeding to Protected PIM Feeding updated.
New chapter 14.15 Fiber Optic Cleaning.
ESW file naming information updated in chapter 16 ESW
Downloading.
Note added to 13.2.6 Balun Panels regarding PS404-0002 front
panel.
SCI/SCO pinout added to 13.5.3 8611 Smart Router and
13.5.4 8609 Smart Router and 8615 Smart Router.


This manual documents the following network elements:
8602 Smart Router
8605 Smart Router
8607 Smart Router
8609 Smart Router
8611 Smart Router
8615 Smart Router
8620 Smart Router
8630 Smart Router
8660 Smart Router
8665 Smart Router

The functionality described in this document for 8615 Smart Router is also applicable to 8615
Smart Router stacked, unless otherwise stated.

© 2015 Coriant. All rights reserved.
This manual is protected by U.S. and international copyright laws, conventions and treaties. Your right to use this manual is

subject to limitations and restrictions imposed by applicable licenses and copyright laws. Unauthorized reproduction, modification,
distribution, display or other use of this manual may result in criminal and civil penalties.
The specifications and information regarding the products in this manual are subject to change without notice. All statements,
information, and recommendations in this manual are believed to be accurate but are presented without warranty of any kind,
express or implied. Users must take full responsibility for their application of any products.
Adobe ® Reader ® are registered trademarks of Adobe Systems Incorporated in the United States and/or other countries.

8600 Smart Routers
Hardware Installation Guide
4

76.8600-40039M
© 2015 Coriant.


Document Information

Terms and Abbreviations
Term

Explanation

ATM

Asynchronous Transfer Mode

CD

Carrier Detect


CDC

Control and DC Power Card (used in 8630 Smart Router and 8660 Smart Router)

CLI

Command Line Interface

Com

Common

Control card The control card in the 8600 system consists of a Control and DC Power Card CDC
(used in 8630 Smart Router and 8660 Smart Router), Switching and Control Module
SCM (used in 8611 Smart Router). In 8000 Intelligent Network Manager and CLI
referred to as unit.

76.8600-40039M
© 2015 Coriant.

CPU

Central Processor Unit

CTS

Clear To Send

CU


Control Functionality (used in 8615 Smart Router and 8665 Smart Router)

DSR

Data Set Ready

DTR

Data Terminal Ready

ELC1

Ethernet Line Card (used in 8630 Smart Router and 8660 Smart Router)

EMC

Electromagnetic Compatibility

EMI

Electromagnetic Interference

ESD

Electrostatic Discharge

ESW

Embedded Software


Fan

One fan in a fan module

Fan Module

A module consisting of two or more fans, the mechanics and possibly the control
electronics

FTP

Foil Shielded Twisted Pair

GE

Gigabit Ethernet

GND

Ground

HM

High Speed Module (used in 8611 Smart Router)

IFC

Interface Module Concentrator (used in 8630 Smart Router and 8660 Smart Router)

IFM


Interface Module. A specific term of the module which can be placed on the IFC line
card or 8620 Smart Router baseboard and which consists of the physical interfaces
(used in 8620 Smart Router, 8630 Smart Router and 8660 Smart Router).

IP

Internet Protocol

LAN

Local Area Network

LED

Light-Emitting Diode

8600 Smart Routers
Hardware Installation Guide
5


Document Information

Line card

The line card in the 8600 system consists of an Ethernet Line Card (ELC1), Interface
Module Concentrator (IFC) and up to two Interface Modules (IFMs) (used in 8630
Smart Router and 8660 Smart Router). In 8000 Intelligent Network Manager and
CLI referred to as unit.


LM

Line Module (used in 8607 Smart Router, 8609 Smart Router and 8611 Smart Router)

LNA

Low Noise Amplifier

LU

Traffic Functionality (used in 8615 Smart Router and 8665 Smart Router)

MGMT

Management port

MO

Mobile Optimization (Interface Module)

MS

Multiservice (Interface Module)

NC

Normally Closed

NE


Network Element

NO

Normally Open

NRTL

Nationally Recognized Testing Laboratory

OCXO

Oven Controlled Crystal Oscillator

Operating
temperature

The operating temperature or temperature range refers to the ambient temperature
of the telecommunications installation

OSPF

Open Shortest Path First

PDF

Power Distribution Field

PKG


Software package file

POS

Packet over SDH/Sonet

RTS

Request To Send

RxD

Receive Data

SCM

Switching and Control Module (used in 8611 Smart Router)

SDH

Synchronous Digital Hierarchy

SEC

SDH Equipment Clock

SFP

Small Form-Factor Pluggable. Transceiver type used in 8600 IFMs and HM.


STP

Shielded Twisted Pair

TxD

Transmit Data

UTP

Unshielded Twisted Pair

8600 Smart Routers
Hardware Installation Guide
6

76.8600-40039M
© 2015 Coriant.


Document Information

Compliance Statement
Hereby, Coriant Oy declares that this product is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC and Directive 2011/65/EU.

FCC Notification Statement
Federal Communications Commission (FCC) Rules require that you be notified of the following:
This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Coriant Operations, Inc., in writing can void
the user’s authority to operate the equipment.

8602 Smart Router and 8605 Smart Router have been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

Industry Canada Notification Statement
Industry Canada interference-causing equipment regulations require that you be notified of the
following:
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

76.8600-40039M
© 2015 Coriant.

8600 Smart Routers
Hardware Installation Guide

7


8600 Smart Routers
Hardware Installation Guide
8

76.8600-40039M
© 2015 Coriant.


Table of Contents

Table of Contents

About This Manual ............................................................................................................ 16
Objectives....................................................................................................................................................................... 16
Audience......................................................................................................................................................................... 16
8600 Smart Routers Technical Documentation.............................................................................................................. 16
Document Conventions .................................................................................................................................................. 19
Documentation Feedback............................................................................................................................................... 19

8600 Smart Routers Discontinued Products .................................................................. 20

Safety Notes ...................................................................................................................... 21
Intended Purpose ............................................................................................................................................................ 21
Class 1 Laser Product..................................................................................................................................................... 21
Jewelry Removal ............................................................................................................................................................ 22
Installation and Maintenance ......................................................................................................................................... 22
Lightning Activity .......................................................................................................................................................... 24


1

Overview ...................................................................................................................... 25
1.1
1.2
1.3
1.4
1.5

2

Site Survey........................................................................................................................................................... 25
ESD...................................................................................................................................................................... 26
Unpacking Equipment ......................................................................................................................................... 26
Packing for Transportation .................................................................................................................................. 27
Required Accessories .......................................................................................................................................... 27

Interface Numbering and Legal Modules .................................................................. 30
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9

8602 Smart Router IF Numbering ....................................................................................................................... 30

8605 Smart Router IF Numbering ....................................................................................................................... 30
8607 Smart Router IF Numbering ....................................................................................................................... 31
8609 Smart Router IF Numbering ....................................................................................................................... 31
8611 Smart Router IF Numbering ....................................................................................................................... 32
8615 Smart Router IF Numbering ....................................................................................................................... 32
8615 Smart Router Stacked IF Numbering ......................................................................................................... 33
8620 Smart Router IF Numbering ....................................................................................................................... 33
8630 Smart Router IF Numbering ....................................................................................................................... 34

76.8600-40039M
© 2015 Coriant.

8600 Smart Routers
Hardware Installation Guide
9


Table of Contents

2.10 8660 Smart Router IF Numbering ....................................................................................................................... 35
2.11 8665 Smart Router IF Numbering ....................................................................................................................... 36

3

Network Element Installation on Rack/Cabinet ........................................................ 38
3.1
3.2
3.3
3.4
3.5

3.6

4

Network Element Installation on Vertical Surface.................................................... 54
4.1
4.2

4.3
4.4

5

8607 Smart Router Fan Module Installation ....................................................................................................... 75
8609 Smart Router, 8611 Smart Router and 8615 Smart Router Fan Module Installation................................. 76

Physical Module Installation ...................................................................................... 79
6.1
6.2
6.3

7

8605 Smart Router and 8607 Smart Router Installation on Wall ........................................................................ 54
8602 Smart Router Outdoor Installation on Wall ................................................................................................ 55
4.2.1
Attaching the Carrying Handle to the 8602 Smart Router chassis ...................................................... 56
4.2.2
8602 Smart Router Instructions for Outdoor Installation on Wall ...................................................... 56
4.2.3

8602 Smart Router Sun Cover Installation.......................................................................................... 61
8602 Smart Router Outdoor Installation on Pole ................................................................................................ 63
8602 Smart Router Indoor Installation on Wall................................................................................................... 67
4.4.1
Attaching the Carrying Handle to the 8602 Smart Router chassis ...................................................... 68
4.4.2
8602 Smart Router Instructions for Indoor Installation on Wall ......................................................... 68
4.4.3
8602 Smart Router Sun Cover Installation.......................................................................................... 73

Fan Module Installation .............................................................................................. 75
5.1
5.2

6

8665 Smart Router Subrack Installation.............................................................................................................. 39
8660 Smart Router and 8630 Smart Router Subrack Installation ....................................................................... 41
8615 Smart Router Installation on Rack/Cabinet ................................................................................................ 45
3.3.1
8615 Smart Router Stacked Installation .............................................................................................. 46
8602 Smart Router Indoor Installation on Rack/Cabinet .................................................................................... 47
8605 Smart Router, 8607 Smart Router, 8609 Smart Router and 8611 Smart Router Installation on
Rack/Cabinet ....................................................................................................................................................... 50
8620 Smart Router Installation on Rack/Cabinet ................................................................................................ 53

8607 Smart Router Line Module Installation ...................................................................................................... 79
8611 Smart Router SCM Installation .................................................................................................................. 80
8609 Smart Router and 8611 Smart Router Physical Line Module Installation ................................................. 82
6.3.1

8611 Smart Router High Speed Module Installation........................................................................... 83
6.3.2
8609 Smart Router and 8611 Smart Router Line Module Installation................................................ 83

8665 Smart Router LU1 and SU1 Installation ........................................................... 85
7.1

Installing Units .................................................................................................................................................... 85
7.1.1
Installation of LU1.............................................................................................................................. 85
7.1.2
Installation of SU1............................................................................................................................... 88

8600 Smart Routers
Hardware Installation Guide
10

76.8600-40039M
© 2015 Coriant.


Table of Contents

7.1.3
7.1.4

8

8630 Smart Router and 8660 Smart Router Specific Installation........................... 92
8.1


8.2

8.3

8.4

9

Removing/Replacing LU1 .................................................................................................................. 89
Removing/Replacing SU1 ................................................................................................................... 90

Upgrading Power Feeding of 8660 Smart Router R2 from Protected CDC Feeding to Protected PIM Feeding.. 92
8.1.1
General................................................................................................................................................. 92
8.1.2
Installation ........................................................................................................................................... 93
8660 Smart Router R1 Fan Module Upgrade Kit.............................................................................................. 100
8.2.1
General............................................................................................................................................... 100
8.2.2
Installation ......................................................................................................................................... 100
8630 Smart Router and 8660 Smart Router Line Card and CDC Assembly with New Captive Screws and New
Ejector Levers.................................................................................................................................................... 106
8.3.1
ELC1 Requirements for 8660 Smart Router and 8630 Smart Router Subracks ............................... 108
8.3.2
Installing Line Card and CDC ............................................................................................................110
8.3.3
Removing Line Card ..........................................................................................................................114

8.3.4
Removing CDC ..................................................................................................................................117
8.3.5
Replacing CDC...................................................................................................................................117
8630 Smart Router and 8660 Smart Router IFC1 Line Card and CDC1 Assembly with Old Captive Screws and
Old Ejector Levers..............................................................................................................................................118
8.4.1
Removing Line Card ......................................................................................................................... 125
8.4.2
Removing CDC ................................................................................................................................. 126
8.4.3
Replacing CDC.................................................................................................................................. 126

Pluggable Transceivers ............................................................................................ 128
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8

Optical Transceivers .......................................................................................................................................... 128
Electrical Transceivers....................................................................................................................................... 129
SFPs Used in 8600 System................................................................................................................................ 130
SFP+ Used in 8600 System ............................................................................................................................... 149
XFP Used in 8600 System................................................................................................................................. 151
CFP2 Used in 8600 System ............................................................................................................................... 154
GNSS SFP ......................................................................................................................................................... 156

Installation of Pluggable Transceivers............................................................................................................... 159
9.8.1
Inserting Pluggable Transceivers....................................................................................................... 159
9.8.2
Removing Pluggable Transceivers .................................................................................................... 160

10 Installation of GNSS SFP.......................................................................................... 162
10.1 Global Navigation Satellite System (GNSS) Overview .................................................................................... 162
10.1.1
Global Positioning System (GPS) ..................................................................................................... 163
10.1.2
Global Navigation System (GLONASS)........................................................................................... 163
10.2 Installation Overview ........................................................................................................................................ 163
10.3 Installation of Passive Antenna ......................................................................................................................... 163
10.4 Installation of the Active Antenna System ........................................................................................................ 164
10.4.1
Planning the GNSS Active Antenna Location .................................................................................. 164
10.4.2
Active Antenna Cabling System........................................................................................................ 165
10.4.3
Examples of Antenna Installations .................................................................................................... 172

76.8600-40039M
© 2015 Coriant.

8600 Smart Routers
Hardware Installation Guide
11



Table of Contents

10.5 GNSS SFP Installation ...................................................................................................................................... 173

11 Grounding .................................................................................................................. 174
11.1 Grounding FTP Cabling .................................................................................................................................... 176
11.2 Grounding of 8602 Smart Router ...................................................................................................................... 177
11.2.1
Grounding Instructions for Inside the Chassis Grounding Point Installation Outdoors.................... 178
11.2.2
Grounding Instructions for Outside the Chassis Grounding Point Installation Outdoors ................. 179

12 Power Installation...................................................................................................... 180
12.1 8602 Smart Router Power Installation............................................................................................................... 180
12.1.1
8602 Smart Router DC Power ........................................................................................................... 181
12.1.2
8602 Smart Router AC Power ........................................................................................................... 182
12.2 DC Power Installation ....................................................................................................................................... 184
12.2.1
8665 Smart Router DC Power Installation ....................................................................................... 184
12.2.2
8660 Smart Router and 8630 Smart Router...................................................................................... 187
12.2.3
8620 Smart Router DC48 .................................................................................................................. 192
12.2.4
8609 Smart Router, 8611 Smart Router and 8615 Smart Router DC Power Installation ................. 193
12.2.5
8607 Smart Router............................................................................................................................. 200
12.2.6

8605 Smart Router DC48, DC24 and DC ......................................................................................... 202
12.3 General DC Power Cabling and Power Accessory Assembly Information ...................................................... 204
12.3.1
Defining Cross-Sectional Area of DC Power Cables (secondary power leads) ................................ 204
12.3.2
Power Accessory Assembly Information .......................................................................................... 207
12.4 AC Power Cabling............................................................................................................................................. 208
12.4.1
8620 Smart Router AC ...................................................................................................................... 208
12.4.2
8605 Smart Router AC ...................................................................................................................... 209

13 Cabling ....................................................................................................................... 210
13.1 General............................................................................................................................................................... 210
13.1.1
Handling Cables .................................................................................................................................211
13.1.2
Maximum Electrical Ethernet Cable Lengths ................................................................................... 213
13.2 Electrical Cabling .............................................................................................................................................. 215
13.2.1
Ethernet Cables.................................................................................................................................. 215
13.2.2
E1/T1 Cables ..................................................................................................................................... 221
13.2.3
DS3 Cables ........................................................................................................................................ 227
13.2.4
xDSL Cables...................................................................................................................................... 227
13.2.5
Terminating Cables............................................................................................................................ 228
13.2.6

Balun Panels ...................................................................................................................................... 229
13.3 Optical Cabling.................................................................................................................................................. 232
13.3.1
Connector Requirements ................................................................................................................... 233
13.3.2
Mode Conditioning Patch Cord......................................................................................................... 233
13.3.3
Attenuators......................................................................................................................................... 233
13.4 Alarm Cabling ................................................................................................................................................... 234
13.4.1
CDC ................................................................................................................................................... 234
13.4.2
SCM................................................................................................................................................... 235

8600 Smart Routers
Hardware Installation Guide
12

76.8600-40039M
© 2015 Coriant.


Table of Contents

13.4.3

8665 Smart Router, 8615 Smart Router, 8609 Smart Router, 8607 Smart Router and 8605 Smart
Router ................................................................................................................................................ 235
13.5 Synchronization Cabling ................................................................................................................................... 236
13.5.1

8665 Smart Router............................................................................................................................. 236
13.5.2
8660 Smart Router, 8630 Smart Router and 8620 Smart Router ...................................................... 238
13.5.3
8611 Smart Router ............................................................................................................................. 241
13.5.4
8609 Smart Router and 8615 Smart Router....................................................................................... 241
13.5.5
8607 Smart Router............................................................................................................................. 242
13.5.6
8605 Smart Router............................................................................................................................. 243
13.6 Communication Link Cabling ........................................................................................................................... 243
13.6.1
Management Interface in CDC.......................................................................................................... 244
13.6.2
Asynchronous Serial Port .................................................................................................................. 245

14 Hardware Maintenance ............................................................................................. 247
14.1 ESW Shutdown Operation................................................................................................................................. 247
14.2 Replacing LU1 and SU1 Cards ......................................................................................................................... 248
14.3 Replacing CDC, SCM or Line Cards ................................................................................................................ 248
14.3.1
Replacing Line Card with No Protection Groups with 8000 Intelligent Network Manager............. 250
14.3.2
Replacing Line Card with Protection Groups with 8000 Intelligent Network Manager................... 250
14.3.3
Replacing CDC or SCM with 8000 Intelligent Network Manager ................................................... 254
14.4 Replacing SCM with CLI .................................................................................................................................. 257
14.5 Replacing 8611 Smart Router, 8609 Smart Router and 8607 Smart Router Physical Line Modules ............... 259
14.5.1

Replacing High Speed Module with Same Type............................................................................... 259
14.5.2
Replacing High Speed Module with Different Type ......................................................................... 260
14.5.3
Replacing Line Module with Same Type .......................................................................................... 261
14.5.4
Replacing Line Module with Different Type .................................................................................... 262
14.5.5
Replacing Line Module Supporting Hot Insertion with Different Type............................................ 263
14.5.6
Adding Line Module Supporting Hot Insertion to an Empty Slot .................................................... 264
14.6 Replacing One of the Members in an 8615 Smart Router Stacked ................................................................... 265
14.6.1
Replacing 8615 Smart Router Stacking Cable .................................................................................. 266
14.7 Maintaining Air Filters ...................................................................................................................................... 267
14.7.1
8660 Smart Router R2 Subrack ......................................................................................................... 267
14.7.2
8660 Smart Router V3.0 and V3.1 .................................................................................................... 268
14.7.3
8630 Smart Router............................................................................................................................. 269
14.7.4
8620 Smart Router............................................................................................................................. 272
14.7.5
8607 Smart Router, 8609 Smart Router, 8611 Smart Router and 8615 Smart Router...................... 272
14.8 Replacing Fan Modules ..................................................................................................................................... 274
14.8.1
8665 Smart Router Fan Module Installation ..................................................................................... 276
14.8.2
8660 Smart Router R2 ....................................................................................................................... 278

14.8.3
8660 Smart Router V3.0 and V3.1 .................................................................................................... 280
14.8.4
8630 Smart Router............................................................................................................................. 282
14.8.5
8620 Smart Router............................................................................................................................. 284
14.8.6
8607 Smart Router, 8609 Smart Router, 8611 Smart Router and 8615 Smart Router...................... 285
14.9 Replacing Fuses................................................................................................................................................. 287
14.9.1
8665 Smart Router............................................................................................................................. 287
14.9.2
8660 Smart Router R2 with DC48 Power Input Module (PIM)........................................................ 288
14.9.3
8620 Smart Router AC ...................................................................................................................... 289
14.9.4
8620 Smart Router DC48 .................................................................................................................. 289
14.9.5
8607 Smart Router, 8609 Smart Router and 8611 Smart Router ...................................................... 290
14.9.6
8615 Smart Router............................................................................................................................. 290
14.9.7
8605 Smart Router............................................................................................................................. 291
76.8600-40039M
© 2015 Coriant.

8600 Smart Routers
Hardware Installation Guide
13



Table of Contents

14.10
14.11
14.12
14.13
14.14
14.15

Replacing DC48 Power Input Modules in 8665 Smart Router ......................................................................... 292
Replacing DC48 Power Input Modules in 8660 Smart Router R2.................................................................... 293
Replacing 8620 Smart Router DC48 Power Input Modules ............................................................................. 293
Replacing 8611 Smart Router and 8609 Smart Router Power Modules ........................................................... 295
Replacing 8607 Smart Router and 8615 Smart Router Power Modules ........................................................... 297
Fiber Optic Cleaning ......................................................................................................................................... 299
14.15.1 Fiber Optic Safety.............................................................................................................................. 299
14.15.2 Fiber Optic Cleaning Requirements .................................................................................................. 300
14.15.3 Fiber Optic Cleaning Procedures....................................................................................................... 303
14.15.4 Cleaning Connectors.......................................................................................................................... 304
14.16 Maintenance: Exceptional Cases....................................................................................................................... 306
14.16.1 Interface Module Assembly............................................................................................................... 306
14.16.2 Replacing Interface Modules in IFC Line Cards............................................................................... 309

15 Commissioning ......................................................................................................... 310
15.1 Overview ........................................................................................................................................................... 310
15.1.1
NE Autoconfiguration........................................................................................................................ 310
15.2 Prerequisites....................................................................................................................................................... 310
15.3 Mechanical Installation Check .......................................................................................................................... 310

15.3.1
Network Element Installation............................................................................................................ 310
15.3.2
Grounding...........................................................................................................................................311
15.3.3
Power Installation ...............................................................................................................................311
15.3.4
Cabling................................................................................................................................................311
15.4 Configuring 8600 Network Elements ................................................................................................................ 312
15.4.1
Powering Up Network Element......................................................................................................... 312
15.4.2
Initial Network Element Configuration ............................................................................................. 312
15.5 Configuring Communication Links ................................................................................................................... 315
15.5.1
Outband and Inband Management..................................................................................................... 315
15.5.2
Configuring Outband Management ................................................................................................... 316
15.5.3
Configuring Inband Management...................................................................................................... 317
15.5.4
Management Traffic QoS................................................................................................................... 318
15.6 Testing 8660 Smart Router and 8630 Smart Router Protection Switching ....................................................... 318
15.6.1
Power ................................................................................................................................................. 318
15.6.2
Management ...................................................................................................................................... 319
15.7 Testing 8611 Smart Router Protection Switching ............................................................................................. 319
15.7.1
Power ................................................................................................................................................. 319

15.7.2
Management ...................................................................................................................................... 319
15.8 Troubleshooting................................................................................................................................................. 320
15.8.1
Understanding LEDs ......................................................................................................................... 320
15.8.2
Power Failures ................................................................................................................................... 336
15.8.3
Fan Module........................................................................................................................................ 337
15.8.4
Line Cards.......................................................................................................................................... 337
15.8.5
Interface Modules and Line Modules................................................................................................ 337
15.8.6
Commissioning.................................................................................................................................. 338

16 ESW Downloading..................................................................................................... 339
16.1 ESW Downloading Using Windows Explorer .................................................................................................. 340
16.2 ESW Downloading Using Command Prompt FTP Session.............................................................................. 341

8600 Smart Routers
Hardware Installation Guide
14

76.8600-40039M
© 2015 Coriant.


Table of Contents


16.3 Activating Application Software ....................................................................................................................... 342

Appendix: Commissioning Test Report........................................................................ 345
Commissioning Test Report ......................................................................................................................................... 345
Mechanical Installation ................................................................................................................................................ 347
Grounding..................................................................................................................................................................... 347
Power............................................................................................................................................................................ 347
Data Cabling................................................................................................................................................................. 348
Network Element Parameters....................................................................................................................................... 348
Power Protection Switching ......................................................................................................................................... 348

Appendix: Conductor Gauge and Dimension Comparison Table .............................. 349

Appendix: Site Survey.................................................................................................... 350
Overview ...................................................................................................................................................................... 350
Site Survey Check List and Acceptance Form for 8600 System ................................................................................. 353
Site Information............................................................................................................................................................ 354
Mechanical and Electrical Data.................................................................................................................................... 355
Data Cabling................................................................................................................................................................. 357
Site Reforms (Exceptions) ........................................................................................................................................... 358
Cables Needed.............................................................................................................................................................. 359
Connectors.................................................................................................................................................................... 359
Other............................................................................................................................................................................. 359
Floor Plan ..................................................................................................................................................................... 359
Plans and Information Supplied ................................................................................................................................... 360
Miscellaneous............................................................................................................................................................... 360
Notes............................................................................................................................................................................. 362

End of Life Treatment ..................................................................................................... 363


76.8600-40039M
© 2015 Coriant.

8600 Smart Routers
Hardware Installation Guide
15


About This Manual

About This Manual
This section discusses the objectives and intended audience of this manual, 8600 Smart Routers
Hardware Installation Guide and consists of the following sections:
• Objectives
• Audience
• Related Documentation
• Document Conventions
• Documentation Feedback

Objectives
The goal is to provide instructions on how to install the 8600 Smart Routers hardware up to the
point when the network element is ready to be powered up. Guidance is provided on mechanical
installation, cooling, grounding, powering, cabling, maintenance, commissioning and ESW
downloading.

Audience
This manual is intended for those involved in the installation planning, physical installation and
maintenance of 8600 Smart Routers hardware.

8600 Smart Routers Technical Documentation

The document numbering scheme consists of the document ID, indicated by numbers, and the
document revision, indicated by a letter. The references in the Related Documentation table below
are generic and include only the document ID. To make sure the references point to the latest
available document versions, please refer to the relevant product document program on the Tellabs
and Coriant Portal by navigating to www.portal.tellabs.com > Product Documentation & Software
> Data Networking > 8600 Smart Routers > Technical Documentation.
Document Title

Description

8600 Smart Routers
ATM and TDM Configuration Guide
(76.8600-50110)

Provides an overview of 8600 NEs PWE3 applications,
including types, Single-Segment and Multi-Segment; PWE3
Redundancy; ATM applications, including PWE3 tunnelling,
Traffic Management, Fault Management OAM, protection and
TDM applications as well as instructions on how to configure
them with CLI.

8600 Smart Routers
Boot and Mini-Applications
Embedded Software Release Notes
(76.8600-50108)

Provides information related to the boot and mini-applications
software of 8605 Smart Router, 8607 Smart Router, 8609
Smart Router, 8611 Smart Router, 8620 Smart Router, 8630
Smart Router and 8660 Smart Router as well as the installation

instructions.

8600 Smart Routers
Hardware Installation Guide
16

76.8600-40039M
© 2015 Coriant.


About This Manual

Document Title

Description

8600 Smart Routers
CLI Commands Manual
(76.8600-50117)

Provides commands available to configure, monitor and maintain
8600 system with CLI.

8600 Smart Routers
Embedded Software Release Notes

8600 Smart Routers SR7.0 Embedded Software Release Notes
(76.8670-50177) for the following products:
• 8602 Smart Router FP7.0
• 8609 Smart Router and 8611 Smart Router FP7.0

• 8615 Smart Router FP7.0
• 8630 Smart Router and 8660 Smart Router FP7.0
• 8665 Smart Router FP7.0

8600 Smart Routers
Equipment Management
Configuration Guide
(76.8600-50118)

Provides an overview of 8600 system HW inventory, software
management, equipment protection 1+1 (CDC and SCM) as well
as instructions on how to configure them with CLI.

8600 Smart Routers
Ethernet Configuration Guide (76.
8600-50133)

Provides an overview of 8600 system Ethernet applications,
including interfaces; Ethernet forwarding (MAC Switching,
Ethernet PWE3, IRB, VLAN, VPLS); Ethernet OAM; LAG;
ELP as well as instructions on how to configure them with CLI.

8600 Smart Routers Smart Routers
Fault Management Configuration
Guide (76.8600-50115)

Provides an overview of 8600 system fault management,
including fault source, types and status as well as instructions on
how to configure it with CLI.


8600 Smart Routers
Frame Relay Configuration Guide
(76.8600-50120)

Provides an overview of 8600 system Frame Relay applications,
including interfaces; Performance Monitoring; protection; Traffic
Management as well as instructions on how to configure them
with CLI.

8600 Smart Routers
Hardware Installation Guide
(76.8600-40039)

Provides guidance on mechanical installation, cooling,
grounding, powering, cabling, maintenance, commissioning and
ESW downloading.

8600 Smart Routers
Interface Configuration Guides

The Interface Configuration Guides provides an overview of the
8600 NEs interface functions, including NE supported interface
types and equipping; interface features; configuration options and
operating modes; fault management; performance monitoring;
interface configuration layers and port protocols as well as
instructions on how to configure them with CLI. The following
interface configuration guides are available:
• 8600 Smart Routers Network Interfaces Configuration
Guide (76.8600-50161) (for 8602 Smart Router, 8615 Smart
Router and 8665 Smart Router)

• 8609 Smart Router and 8611 Smart Router FP7.0 Interface
Configuration Guide (76.8670-50179)
• 8600 Smart Routers FP7.0 Interface Configuration Guide
(76.8670-50180) (for 8630 Smart Router and 8660 Smart
Router)

8600 Smart Routers
IP Forwarding and Traffic
Management Configuration Guide
(76.8600-50122)

76.8600-40039M
© 2015 Coriant.

Provides an overview of 8600 NEs IP, forwarding and traffic
management functionality, including: IP addressing; IP hosting
(ARP, DHCP); IP routing (static); ACL; Differentiated Services
(Policing, Queue Management, Shaping) as well as instructions
on how to configure them with CLI.

8600 Smart Routers
Hardware Installation Guide
17


About This Manual

Document Title

Description


8600 Smart Routers
Management Communications
Configuration Guide
(76.8600-50125)

Provides an overview of 8600 system management
communications functions, including communication protocols:
BMP; FTP; RADIUS; SNMP; SSH; TELNET as well as
instructions for configuring them with CLI.

8600 Smart Routers
Mobile Optimization Configuration
Guide (76.8600-50100)

Provides an overview of 8600 system Mobile Optimization
applications as well as instructions on how to configure them
with CLI.

8600 Smart Routers
MPLS Applications Configuration
Guide (76.8600-50123)

Provides an overview of 8600 NEs MPLS applications (including
FRR (one-to-one and facility backup); LDP; protection and
Traffic Engineering), MPLS-TP applications (including OAM,
linear protection), S-MPLS applications as well as instructions
on how to configure them with CLI.

8600 Smart Routers

Performance Counters Reference
Guide (76.8600-50143)

Provides an overview of 8600 system supported performance
counters.

8600 Smart Routers
Reference Manuals

The reference manuals describe the 8600 network element
features including:
• NE enclosure, baseboard, power supply modules, and
interfaces in 8602 Smart Router FP7.0 Reference Manual
(76.8670-40130)
• NE enclosure, baseboard, power supply modules, interfaces
and physical LM types in 8609 Smart Router FP7.0 Reference Manual
• NE enclosure, baseboard, power supply modules, SCMs, HM
and LM types in 8611 Smart Router FP7.0 Reference Manual
• NE enclosure, baseboard, power supply modules, and interfaces in 8615 Smart Router FP7.0 Reference Manual
(76.8670-40132)
• NE subrack, fan modules, CDCs, line cards and IFMs in 8630
Smart Router FP7.0 Reference Manual
• NE subrack, fan modules, CDCs, line cards and IFMs in 8660
Smart Router FP7.0 Reference Manual
• NE subrack, fan modules, line unit and switch unit in 8665
Smart Router FP7.0 Reference Manual (76.8670-40128)

8600 Smart Routers
Routing Protocols Configuration
Guide (76.8600-50121)


Provides an overview of 8600 NEs routing protocols, including
BFD; BGP; BGP MP; ECMP; IS-IS; OSPF and VRRP as well as
instructions on how to configure them with CLI.

8600 Smart Routers
Scalability Reference Manual
(76.8600-50160)

Provide a summary of tested scalability limits of the 8600 Smart
Routers.

8600 Smart Routers
SNMP MIB Support
(76.8600-50116)

Describes SNMP MIB support by the 8600 NEs and provides
information on the supported objects and traps. For further
information on SNMP MIBs, see the related RFCs.

8600 Smart Routers
Statistic Counters Reference Guide
(76.8600-50142)

Provides an overview of 8600 system supported statistic counters.

8600 Smart Routers
Synchronization Configuration
Guide (76.8600-50114)


Provides an overview of 8600 NEs synchronization functionality,
including physical layer Frequency Synchronization (SEC, EEC);
PTP Frequency Synchronization; Phase-Time Synchronization
(L2 and L3 applications) as well as instructions on how to
configure them with CLI.

8600 Smart Routers
Hardware Installation Guide
18

76.8600-40039M
© 2015 Coriant.


About This Manual

Document Title

Description

8600 Smart Routers
Test and Measurement Configuration
Guide (76.8600-50124)

Provides an overview of 8600 NEs measurement and connectivity
verification tools, including Ethernet loopback; IP ping and
traceroute; MAC swap loopback; MPLS ping and traceroute;
PLT; PWE3 loopback; VCCV (BFD, LSP ping) as well as
instructions on how to configure them with CLI.


8600 Smart Routers
VPNs Configuration Guide
(76.8600-50128)

Provides an overview of 8600 system virtual private network
(VPN) layer 3 applications as well as instructions on how to
configure them with CLI.

8000 Intelligent Network Manager
Online Help

Provides instructions on how different operations are performed
with the 8000 Intelligent Network Manager. Describes also
different parameters and controls of the 8000 Intelligent Network
Manager dialogs and windows.
Note that the Online Help is not available on the Portal but it is
incorporated in the 8000 Intelligent Network Manager.

Document Conventions
This is a note symbol. It emphasizes or supplements information in the document.

This is a caution symbol. It indicates that damage to equipment is possible if the instructions
are not followed.

This is a warning symbol. It indicates that bodily injury is possible if the instructions are not
followed.

Documentation Feedback
Please contact us to suggest improvements or to report errors in our documentation:
Email:


76.8600-40039M
© 2015 Coriant.

8600 Smart Routers
Hardware Installation Guide
19


8600 Smart Routers Discontinued Products

8600 Smart Routers Discontinued Products
8600 Smart Routers Manufacture Discontinued (MD) notifications are available on the Tellabs
and Coriant Portal, www.portal.tellabs.com > Product Documentation & Software > Data
Networking > [8600 Smart Routers product name] > Product Notifications.

8600 Smart Routers
Hardware Installation Guide
20

76.8600-40039M
© 2015 Coriant.


Safety Notes

Safety Notes
This chapter lists safety notes and their translations for 8600 network elements.

Intended Purpose

The equipment shall be used only for its intended purpose.
Das Gerät soll nur für den vorgesehen Einsatzzweck verwendet werden.

CAUTION: Do not insert an RJ-11 (telephone) plug into Ethernet or E1/T1 ports. Equipment
damage may result.
ACHTUNG: Stecken Sie keine RJ-11 (Telefon) Stecker in die Ethernet oder E1/T1 Anschlüsse
da dieses zu einer Beschädigung des Gerätes führen kann.

CAUTION: Do not climb on or stand on the 8600 network element. Neither the network element
nor its enclosure is designed to support the weight of a person.
ACHTUNG: Steigen Sie oder stellen Sie sich nicht auf das 8600 Netzwerk Element. Weder
des Netzwerk Element noch das Gehäuse sind dafür ausgelegt worden das Gewicht einer
Person zu tragen.

Class 1 Laser Product
Class 1 laser product.
Laserprodukt der Klasse 1.

WARNING: No other types of lasers can be used than supplied and approved by Coriant. If
other types are used, the laser class and compliance to laser safety and EMC standards
must be checked.
WARNUNG: Verwenden Sie keine anderen als die von Coriant gelieferten und zugelassenen
Lasertypen. Falls Sie andere Typen verwenden, müssen die Laserklasse und die Einhaltung
von Lasersicherheits- und EMV-Normen geprüft werden.

76.8600-40039M
© 2015 Coriant.

8600 Smart Routers
Hardware Installation Guide

21


Safety Notes

WARNING: Install only lasers that have been demonstrated to meet Class 1 eye safe levels by
a Nationally recognized Authority such as The Food and Drug administration's 21CFR1040
Laser Energy Source, UL 60950-1 Information Technology equipment and European norms
EN60950-1, EN60825-1 and EN60825-2. Failure to use laser transceivers which meet these
standards could result in eye damage to users or service personnel working around the
equipment.
WARNUNG: Installieren Sie nur Laser der Klasse 1 die die Augenschutz Richtlinien
der staatlich anerkannten Organisationen wie z.B. The Food and Drug administration’s
21CFR1040 Laser Energy Source, UL 60950-1 Information Technology equipment oder die
Europa Normen EN60950-1, EN60825-1 und EN60825-2 erfüllen. Laser die diese Standards
nicht erfüllen können zu Verletzungen an Augen des Benutzers und des Service Personals
das in der Nähe der Geräte arbeitet führen.

WARNING: Optic operation should be verified by observing the status LEDs. Do not look into
the laser or fiber to verify operation.
WARNUNG: Überprüfen Sie die Funktionstüchtigkeit der Optischen Einheit anhand der Status
LED. Schauen Sie nie in den Laser oder die Glasfaser um die Funktion zu prüfen.

WARNING: Because invisible radiation may be emitted from the aperture of the port when no
fiber cable is connected, avoid exposure to radiation and do not stare into open apertures.
WARNUNG: Aus der Stecker Öffnung können unsichtbare Strahlen emittieren wenn kein
Glasfaserkabel angeschlossen ist. Vermeiden Sie es sich den Strahlungen auszusetzen und
starren Sie nicht in die Öffnungen.

Jewelry Removal

WARNING: Before working on equipment that is connected to power source, remove jewelry
(including rings, necklaces, and watches). Metal objects will heat up when connected to
power and ground and can cause serious burns or weld the metal object to the terminals.
WARNUNG: Bevor Sie an Geräten arbeiten die an eine Spannungsversorgung angeschlossen
sind, entfernen Sie all Ihren Schmuck (einschließlich Ringe, Ketten und Uhren). Metallobjekte
erhitzen sich wenn sie einen Kurzschluss zwischen Spannungsversorgung und Masse/Erdung
verursachen. Dieses kann zu schweren Verbrennungen führen oder das Anschweißen an die
Anschlussklemmen zur Folge haben.

Installation and Maintenance
WARNING: This equipment is to be installed and maintained by qualified service personnel
only.
WARNUNG: Dieses Gerät darf nur von qualifiziertem Fach- oder Servicepersonal installiert
oder gewartet werden.

8600 Smart Routers
Hardware Installation Guide
22

76.8600-40039M
© 2015 Coriant.


Safety Notes

CAUTION: Electrical interfaces may require external protection devices to safeguard against
overvoltages, transients, earth potential differences and/or power cross-contacts.
ACHTUNG: Elektrische Anschlüsse benötigen evtl. externe Schutzschaltungen
um sie vor Überspannung, Einschaltspitzen, Erdpotentialunterschieden und/oder
Fremdspannungsüberlagerung zu schützen.


CAUTION: While handling the modules (Interface Modules, Line Modules, High Speed
Modules, SCM, CDC, Line Cards, Power Modules, Power Input Modules and Fan Modules) of
the 8600 network elements, always take care of proper handling, e.g. do not bend or twist
the modules, do not touch the components on the modules, take care of good ESD working
practices, do not use excessive force while inserting or removing the modules, do not drop
the modules.
ACHTUNG: Achten Sie darauf, dass Sie mit den Modulen (Schnittstellenmodulen,
Netzmodulen, Hochgeschwindigkeits-Netzmodulen, SCM, CDC, Netzkarten, Netzteilmodulen,
Netzeingangsmodulen und Lüftermodulen) der 8600-Netzwerkelemente sorgsam umgehen
und diese nicht verbiegen oder verdrehen. Berühren Sie nicht die Bauteile auf den Modulen.
Wenden Sie beim Ein- oder Ausbauen der Module keine übermäßige Kraft an und lassen Sie
die Module nicht fallen. Beachten Sie außerdem die Arbeitsrichtlinien im Zusammenhang
mit elektrostatischer Entladung.

WARNING: For US usage: this equipment must only be used with a Nationally Recognized
Testing Laboratory (NRTL) approved power supply.
WARNUNG: Für den Gebrauch in den USA: Dieses Gerät darf nur mit einer von einer national
anerkannten Test Einrichtung (NTRL) zugelassenen Spannungsversorgung betrieben werden.

WARNING: Read the installation instructions before you connect the system to its power
source.
WARNUNG: Lesen Sie die Installationsanweisungen bevor Sie das System an die
Spannungsversorgung anschließen.

WARNING: When installing or performing maintenance on the equipment, the ground
connection must always be made first. Never operate or maintain an ungrounded equipment.
WARNUNG: Bei der Installation oder bei Wartungsarbeiten am Gerät muss die Masse/Erdung
immer als erstes angeschlossen werden. Betreiben Sie oder arbeiten Sie niemals an einem
Gerät das nicht geerdet ist.


76.8600-40039M
© 2015 Coriant.

8600 Smart Routers
Hardware Installation Guide
23


Safety Notes

WARNING: Keep away from moving fan blades during operation. The fan propeller will also
continue rotating momentarily after extraction. Be careful not to touch the propeller before
rotation has stopped.
WARNUNG: Halten Sie während des Betriebs einen ausreichenden Sicherheitsabstand zu
den bewegten Lüfterflügeln. Das Lüfterrad wird auch nach der Extraktion weiterhin kurzzeitig
rotieren. Seien Sie vorsichtig es nicht zu berühren bevor der Propeller zum Stillstand
gekommen ist.

WARNING: If you are going to remove the power module from 8607 Smart Router, 8609 Smart
Router, 8611 Smart Router, 8615 Smart Router, or the power input module from 8620 Smart
Router or 8660 Smart Router, or CDC from 8660 Smart Router/8630 Smart Router, first turn off
the power switch (if any), then detach the power cable and only after these actions, remove
the power module or CDC. Never keep the power cable connected to the power module or
CDC while it is out of its slot. Otherwise the power module or CDC may cause bodily injury or
damage to the part that it is touching.
WARNUNG: Vor dem Entfernen des Netzteilmoduls des 8607 Smart Router, 8609 Smart Router
oder des 8611 Smart Router oder des 8615 Smart Router oder des Netzeingangsmoduls des
8620 Smart Router oder 8660 Smart Router oder der CDC-Karte des 8660 Smart Router/8630
Smart Router zuerst den Netzschalter (falls vorhanden) ausschalten und danach das

Netzkabel vom Netzteil trennen. Erst jetzt das Netzteilmodul oder die CDC-Karte ausbauen.
Lassen Sie niemals das Netzkabel mit dem Netzteilmodul oder CDC verbunden, während es
aus seinem Einschub ausgebaut ist. Andernfalls kann es zu Verletzungen kommen oder
andere Bauteile durch Berührung beschädigt werden.

AC power installation of the equipment must comply with local and national electrical codes.

Lightning Activity
WARNING: Do not work on the system or connect or disconnect cables during periods of
lightning activity.
WARNUNG: Arbeiten Sie während eines Gewitters mit Blitzschlag nicht an dem Gerät oder
schließen Sie auch keine Kabel an bzw. trennen Sie keine ab.

8600 Smart Routers
Hardware Installation Guide
24

76.8600-40039M
© 2015 Coriant.


1 Overview

1 Overview
This section describes the tasks typically required to install a 8600 Smart Routers. Begin the
installation process as soon as the site preparation is complete and all system components have
been unpacked and inspected.
It is assumed that the reader is familiar with the 8600 Smart Routers concept, telecommunications
cabling electronic circuitry and wiring practice basics to use this guide. This document should be
used together with the 8600 Smart Routers Reference Manuals where 8600 Smart Routers hardware

is documented in detail.
It is recommended to have at least two persons installing the network elements in the rack or cabinet.
8600 Smart Routers must be installed in a location which is accessible only to service personnel or
specially trained users (restricted access location as defined in [IEC 60950-1]). It must be ensured
that unauthorized persons cannot access the installation.
It is advisable to retain the packaging in which a module or component was shipped. You can
possibly use it e.g. for storing the item in the future.
The following list describes the overall installation sequence of the 8600 Smart Routers network
elements:
• planning of the installation
• unpack and inspect all system components
• cooling
• mechanical assembly of network elements
• grounding
• power installation
• cabling
• verifying the installation
• initial configuration using CLI

1.1

Site Survey
The site survey included in this manual as an Appendix will help in planning the installation,
see Appendix: Site Survey.
Make sure that the site survey is carried out according to the instructions. Ensure that there is
sufficient power feeding capability with sufficient battery back-up; consider work safety and ESD
protection, Electromagnetic compatibility (EMC) of all installed equipment, cooling of equipment,
rack, cabinet as well as the installation site.

76.8600-40039M

© 2015 Coriant.

8600 Smart Routers
Hardware Installation Guide
25