Appendix 3 JIS Steel and Related Standards 471


Handbook of Comparative World Steel Standards
Designation Title
G 3314:1995 Hot-dip aluminium-coated steel sheets and coils
G 3315:2002 Chromium plated tin free steel
G 3316:1987 Shapes and dimensions of corrugated steel sheets
G 3317:1994 Hot-dip zinc-5% aluminium alloy-coated steel sheets and coils
G 3318:1994 Prepainted hot-dip zinc-5% aluminium alloy-coated steel sheets and coils
G 3320:1999 Coated stainless steel sheets
G 3321:1998 Hot-dip 55% aluminium-zinc alloy-coated steel sheets and coils
G 3322:1998 Prepainted hot-dip 55% aluminium-zinc alloy-coated steel sheets and coils
G 3350:1987 Light gauge steels for general structure
G 3351:1987 Expanded metals
G 3352:2003 Steel decks
G 3353:1990 Welded light gauge H steels for general structures
G 3429:1988 Seamless steel tubes for high pressure gas cylinder
G 3441:1988 Alloy steel tubes for machine purposes
G 3442:2004 Galvanized steel pipes for ordinary piping
G 3443:2004 Coated steel pipes for water service
G 3444:1994 Carbon steel tubes for general structural purposes
G 3445:1988 Carbon steel tubes for machine structural purposes
G 3446:1994 Stainless steel pipes for machine and structural purposes
G 3447:2004 Stainless steel sanitary pipes
G 3448:2004 Light gauge stainless steel tubes for ordinary piping
G 3451:1987 Fittings of coated steel pipes for water service
G 3452:2004 Carbon steel pipes for ordinary piping
G 3454:1988 Carbon steel pipes for pressure service
G 3455:1988 Carbon steel pipes for high pressure service
G 3456:2004 Carbon steel pipes for high temperature service

G 3457:1988 Arc welded carbon steel pipes
G 3458:1988 Alloy steel pipes
G 3459:2004 Stainless steel pipes
G 3460:1988 Steel pipes for low temperature service
G 3461:1988 Carbon steel boiler and heat exchanger tubes
G 3462:2004 Alloy steel boiler and heat exchanger tubes
G 3463:1994 Stainless steel boiler and heat exchanger tubes
G 3464:1988 Steel heat exchanger tubes for low temperature service
G 3465:1988 Seamless steel tubes for drilling
G 3466:1988 Carbon steel square pipes for general structural purposes
G 3467:1988 Steel tubes for fired heaters
G 3468:2004 Large diameter welded stainless steel pipes
G 3469:2002 Polyethylene coated steel pipes
G 3471:1977 Corrugated steel pipes and sections
G 3472:1988 Electric resistance welded carbon steel tubes for automobile structural purposes
G 3473:1988 Carbon steel tubes for cylinder barrels
G 3474:1995 High tensile strength steel tubes for tower structural purposes
G 3475:1996 Carbon steel tubes for building structure
G 3491:1993 Asphalt protective coatings for steel water pipe
G 3492:1993 Coal-tar enamel protective coatings for steel water pipe
G 3502:2004 Piano wire rods
G 3503:1980 Wire rods for core wire of covered electrode
G 3505:2004 Low carbon steel wire rods
G 3506:2004 High carbon steel wire rods
G 3507:1991 Carbon steel wire rods for cold heading and cold forging
G 3508:1991 Boron steel wire rods for cold heading and cold forging
G 3509-1:2003 Low-alloyed steels for cold heading – Part 1: Wire rods
G 3509-2:2003 Low-alloyed steels for cold heading – Part 2: Wires
G 3510:1992 Testing methods for steel tire cords
472 JIS Steel and Related Standards Appendix 3



Handbook of Comparative World Steel Standards
Designation Title
G 3521:1991 Hard drawn steel wires
G 3522:1991 Piano wires
G 3523:1980 Core wires for covered electrode
G 3525:1998 Wire ropes
G 3532:2000 Low carbon steel wires
G 3533:1993 Barbed wires
G 3535:1998 Wire ropes for aircraft control
G 3536:1999 Uncoated stress-relieved steel wires and strands for prestressed concrete
G 3537:1994 Zinc-coated steel wire strands
G 3538:1994 Hard drawn steel wire for prestressed concrete
G 3539:1991 Carbon steel wires for cold heading and cold forging
G 3540:1995 Wire ropes for mechanical control
G 3542:1993 Precoated color zinc-coated steel wires
G 3543:1999 Polyvinyl chloride coated color steel wires
G 3544:1993 Hot-dip aluminium-coated steel wires
G 3545:1991 Boron steel wires for cold heading and cold forging
G 3546:2000 Wire ropes with profile wires
G 3547:1993 Zinc-coated low carbon steel wires
G 3548:1994 Zinc-coated steel wires
G 3549:2000 Wire ropes for structure
G 3550:2003 Stainless steel wire ropes for structure
G 3551:2000 Welded steel wire and bar fabrics
G 3552:2002 Chain link wire netting
G 3553:2002 Crimped wire cloth
G 3554:2002 Hexagonal wire netting
G 3555:2004 Woven wire cloth

G 3556:2002 Industrial woven wire cloths
G 3560:1994 Oil tempered wire for mechanical springs
G 3561:1994 Oil tempered wire for valve springs
G 3601:2002 Stainless-clad steels
G 3602:2004 Nickel and nickel alloy clad steels
G 3603:1992 Titanium clad steels
G 3604:2004 Copper and copper alloy clad steels
G 4051:1979 Carbon steels for machine structural use
G 4052:2003 Structural steels with specified hardenability bands
G 4053:2003 Low-alloyed steels for machine structural use
G 4107:1994 Alloy steel bolting materials for high temperature service
G 4108:1994 Alloy steel bars for special application bolting materials
G 4109:2003 Chromium-molybdenum alloy steel plates for boilers and pressure vessels
G 4110:2004 High strength chromium-molybdenum and chromium-molybdenum-vanadium alloy steel plates for pressure vessels
under high-temperature service
G 4202:1979 Aluminium chromium molybdenum steels
G 4303:1998 Stainless steel bars
G 4304:1999 Hot rolled stainless steel plates, sheets and strip
G 4305:1999 Cold rolled stainless steel plates, sheets and strip
G 4308:1998 Stainless steel wire rods
G 4309:1999 Stainless steel wires
G 4310:1999 Method of mass calculation for stainless steel plates and sheets, and heat-resisting steel plates and sheets
G 4311:1991 Heat-resisting steel bars
G 4312:1991 Heat-resisting steel plates and sheets
G 4313:1996 Cold rolled stainless steel strip for springs
G 4314:1994 Stainless steel wires for springs
G 4315:2000 Stainless steel wires for cold heading and cold forging
G 4316:1991 Stainless steel wire rods for welding
G 4317:1999 Hot rolled stainless steel equal leg angles
G 4318:1998 Cold finished stainless steel bars

Appendix 3 JIS Steel and Related Standards 473


Handbook of Comparative World Steel Standards
Designation Title
G 4319:1991 Stainless steel blooms and billets for forgings
G 4320:2003 Cold formed stainless steel sections
G 4321:2000 Stainless steel for building structure
G 4401:2000 Carbon tool steels
G 4403:2000 High speed tool steels
G 4404:2000 Alloy tool steels
G 4410:1984 Hollow drill steels
G 4801:1984 Spring steels
G 4802:1999 Cold-rolled steel strips for springs
G 4804:1999 Free cutting carbon steel
G 4805:1999 High carbon chromium bearing steels
G 4901:1999 Corrosion-resisting and heat-resisting superalloy bars
G 4902:1991 Corrosion-resisting and heat-resisting superalloy plates and sheets
G 4903:1991 Seamless nickel-chromium-iron alloy pipes
G 4904:1991 Seamless nickel-chromium-iron alloy heat exchanger tubes
G 5101:1991 Carbon steel castings
G 5102:1991 Steel castings for welded structure
G 5111:1991 High tensile strength carbon steel castings and low alloy steel castings for structural purposes
G 5121:2003 Corrosion-resistant cast steels for general applications
G 5122:2003 Heat-resistant cast steels and alloys for general applications
G 5131:1991 High manganese steel castings
G 5151:1991 Steel castings for high temperature and high pressure service
G 5152:1991 Steel castings for low temperature and high pressure service
G 5201:1991 Centrifugally cast steel pipes for welded structure
G 5202:1991 Centrifugally cast steel pipes for high temperature and high pressure service

G 5501:1995 Grey iron castings
G 5502:2001 Spheroidal graphite iron castings
G 5503:1995 Austempered spheroidal graphite iron castings
G 5504:1992 Heavy-walled ferritic spheroidal graphite iron castings for low temperature service
G 5510:1999 Austenitic iron castings
G 5511:1991 Low thermal expansive fe-alloy castings
G 5525:2000 Cast-iron drainage pipes and fittings
G 5526:1998 Ductile iron pipes
G 5527:1998 Ductile iron fittings
G 5528:1984 Epoxy-powder coating for interior of ductile iron pipes and fittings
G 5705:2000 Malleable iron castings
G 5901:1974 Molding silica sand
G 5902:1974 Molding natural sand
G 5903:1975 Cast shot and grit
G 5904:1966 Testing method of cast shot and grit grain size
G 7101:2000 Structural steels with improved atmospheric corrosion resistance
G 7102:2000 Continuously hot-rolled steel sheet of structural quality with improved atmospheric corrosion resistance
G 7103:2000 Steel for the reinforcement of concrete – Part 1: Plain bars
G 7104:2000 Steel for the reinforcement of concrete – Part 2: Ribbed bars
G 7105:2000 Heat-treatable steels, alloy steels and free-cutting steels – Part 18: Bright products of unalloyed and low alloy steels
G 7121:2000 Cold-reduced electrolytic tinplate
G 7122:2000 Cold-reduced electrolytic chromium/chromium oxide-coated steel
G 7123:2000 Cold-reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide-coated steel
G 7124:2000 Continuous hot-dip aluminium/silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
G 7125:2003 Hollow steel bars for machining (ISO specifications)
G 7214:2000 Seamless nickel and nickel alloy tube
G 7215:2003 Plain end seamless steel tubes for mechanical application (ISO specifications)
G 7216:2003 Plain end seamless precision steel tubes – Technical conditions for delivery (ISO specifications)
G 7217:2003 Plain end welded precision steel tubes – Technical conditions for delivery (ISO specifications)
G 7218:2003 Plain end as-welded and sized precision steel tubes – Technical conditions for delivery (ISO specifications)

474 JIS Steel and Related Standards Appendix 3


Handbook of Comparative World Steel Standards
Designation Title
G 7219:2003 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 1: Unalloyed steels with specified
room temperature properties (ISO specifications)
G 7220:2003 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 2: Unalloyed and alloyed steels with
specified elevated temperature properties (ISO specifications)
G 7221:2003 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 3: Unalloyed and alloyed steels with
specified low temperature properties (ISO specifications)
G 7222:2003 Seamless steel tubes for pressure purposes – Technical delivery conditions – Part 4: Austenitic stainless steels (ISO
specifications)
G 7223:2003 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Unalloyed steel tubes with specified
room temperature properties (ISO specifications)
G 7224:2003 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric resistance and induction
welded unalloyed and alloyed steel tubes with specified elevated temperature properties (ISO specifications)
G 7225:2003 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Electric resistance and induction
welded unalloyed and alloyed steel tubes with specified low temperature properties (ISO specifications)
G 7226:2003 Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Longitudinally welded austenitic
stainless steel tubes (ISO specifications)
G 7301:1998 Steel wire ropes for general purposes – Characteristics
G 7302:2000 Zinc coatings for steel wire
G 7303:2000 Zinc-coated steel wire for fencing
G 7304:2000 Steel wire for mechanical springs – Part 1: General requirements
G 7305:2000 Steel wire for mechanical springs – Part 2: Cold-drawn carbon steel wire
G 7306:2000 Steel wire for mechanical springs – Part 3: Oil-hardened and tempered wire
G 7307:2000 Steel for the prestressing of concrete – Part 1: General requirements
G 7308:2000 Steel for the prestressing of concrete – Part 2: Cold-drawn wire
G 7309:2000 Steel for the prestressing of concrete – Part 3: Quenched and tempered wire

G 7310:2000 Steel for the prestressing of concrete – Part 4: Strand
G 7311:2000 Steel for the prestressing of concrete – Part 5: Hot-rolled steel bars with or without subsequent processing
G 7401:2000 Steels for cold heading and cold extruding
G 7501:2000 Direct-hardening unalloyed and low-alloyed wrought steel in form of different black products
G 7502:2000 Wrought nitriding steels
G 7503:2000 Wrought case-hardening steels
G 7601:2000 Heat-resisting steels and alloys
G 7602:2000 Stainless steels for springs – Part 1: Wire
G 7603:2000 Valve steels for internal combustion engines
G 7604:2000 Nickel and nickel alloys bars
G 7605:2001 Nickel and nickel alloy plate, sheet and strip
G 7701:2000 Tool steels
G 7751:2000 Hot rolled steels for quenched and tempered springs
G 7821:2000 Cast carbon steels for general engineering purposes




Handbook of Comparative World Steel Standards
Appendix
4

JIS DISCONTINUED STEEL
AND RELATED STANDARDS

476 JIS Discontinued Steel and Related Standards Appendix 4


Handbook of Comparative World Steel Standards
Designation Date Whitdrawn/Replaced by

JIS G 0301:1950 Withdrawn in: 1954-12-18
JIS G 0302:1956 Withdrawn in: 1966-11-01 Replaced by: G 1501;G 1511;G 1512;G1513
JIS G 0304:1951 Withdrawn in: 1957-10-30
JIS G 0305:1953 Withdrawn in: 1962-03-01
JIS G 0405:1950 Withdrawn in: 1959-12-01 Replaced by: G4801
JIS G 0406:1950 Withdrawn in: 1959-12-01 Replaced by: G4801
JIS G 0501:1952 Withdrawn in: 1955-02-12 Replaced by: G3421;G3422;G3423
JIS G 0502:1952 Withdrawn in: 1955-02-12 Replaced by: G3436;G3437;G3438
JIS G 0704:1977 Withdrawn in: 1980-03-01
JIS G 1202:1975 Withdrawn in: 1995-07-01 Replaced by: G1253
JIS G 1203:1977 Withdrawn in: 1986-06-01 Replaced by: Z2611
JIS G 1230:1969 Withdrawn in: 1982-09-01 Replaced by: G1257
JIS G 1231:1969 Withdrawn in: 1981-03-01 Replaced by: G1236;G1237
JIS G 1251:1976
JIS G 1252:1975
JIS G 1254:1976 Withdrawn in: 1986-06-01 Replaced by: G1256
JIS G 1255:1977 Withdrawn in: 1986-06-01 Replaced by: G1256
JIS G 1315:1974 Withdrawn in: 1983-11-01
JIS G 1511:1976 Withdrawn in: 1986-02-01 Replaced by: G1601
JIS G 1512:1976 Withdrawn in: 1986-02-01 Replaced by: G1601
JIS G 1513:1976 Withdrawn in: 1986-02-01 Replaced by: G1601
JIS G 1514:1976 Withdrawn in: 1986-02-01 Replaced by: G1601
JIS G 1515:1976 Withdrawn in: 1986-02-01 Replaced by: G1601
JIS G 1516:1976 Withdrawn in: 1986-02-01 Replaced by: G1601
JIS G 1517:1975 Withdrawn in: 1985-03-01
JIS G 1518:1976 Withdrawn in: 1986-02-01 Replaced by: G1602
JIS G 1519:1975 Withdrawn in: 1986-02-01 Replaced by: G1602
JIS G 1520:1976 Withdrawn in: 1986-02-01 Replaced by: G1602
JIS G 1521:1975 Withdrawn in: 1986-02-01 Replaced by: G1602
JIS G 1522:1975 Withdrawn in: 1986-02-01 Replaced by: G1603

JIS G 1523:1975 Withdrawn in: 1986-02-01 Replaced by: G1603
JIS G 1524:1976 Withdrawn in: 1986-02-01 Replaced by: G1603
JIS G 1525:1975 Withdrawn in: 1986-02-01 Replaced by: G1603
JIS G 1526:1976 Withdrawn in: 1986-02-01 Replaced by: G1603
JIS G 1527:1976 Withdrawn in: 1986-02-01 Replaced by: G1601
JIS G 1528:1968 Withdrawn in: 1986-02-01 Replaced by: G1604
JIS G 1529:1975 Withdrawn in: 1985-03-01
JIS G 1530:1975 Withdrawn in: 1986-02-01 Replaced by: G1603
JIS G 1531:1975 Withdrawn in: 1986-02-01 Replaced by: G1602
JIS G 2201:1976 Withdrawn in: 2000-12-20
JIS G 2202:1976 Withdrawn in: 2000-12-20
JIS G 2203:1950 Withdrawn in: 1953-11-07 Replaced by: G2201;G2202
JIS G 2204:1950 Withdrawn in: 1953-11-07 Replaced by: G2201;G2202
JIS G 2205:1953 Withdrawn in: 1953-11-07 Replaced by: G2201;G2202
JIS G 2305:1969 Withdrawn in: 1978-12-01
JIS G 2317:1969 Withdrawn in: 1978-12-01
JIS G 3102:1964 Withdrawn in: 1965-07-01 Replaced by: G4051
JIS G 3107:1952 Withdrawn in: 1956-04-18 Replaced by: G3111
JIS G 3110:1953 Withdrawn in: 1965-03-01 Replaced by: G3112
JIS G 3115-1:1995 Part 1 Withdrawn in: 2000-06-20 Replaced by: JIS G 3115:2000
JIS G 3121:1951 Withdrawn in: 1955-02-12 Replaced by: G3123
JIS G 3122:1952 Withdrawn in: 1955-02-12 Replaced by: G3123
JIS G 3211:1977 Withdrawn in: 1982-07-01 Replaced by: G3202;G3203;G3204;G3205
JIS G 3212:1977 Withdrawn in: 1982-07-01 Replaced by: G3202;G3203;G3204;G3205
JIS G 3213:1977 Withdrawn in: 1982-07-01 Replaced by: G3202;G3203;G3204;G3205
JIS G 3301:1965 Withdrawn in: 1967-07-01 Replaced by: G3131
JIS G 3304:1950 Withdrawn in: 1956-07-17 Replaced by: G3301
JIS G 3305:1953 Withdrawn in: 1956-07-17 Replaced by: G3310
JIS G 3306:1954 Withdrawn in: 1956-07-17 Replaced by: G3310
JIS G 3307:1965 Withdrawn in: 1967-07-01 Replaced by: G3131

JIS G 3308:1957 Withdrawn in: 1969-08-06 Replaced by: G3141
JIS G 3309:1950 Withdrawn in: 1953-05-08
JIS G 3310:1965 Withdrawn in: 1969-08-06 Replaced by: G3141
JIS G 3391:1953 Withdrawn in: 1988-10-01
Appendix 4 JIS Discontinued Steel and Related Standards 477


Handbook of Comparative World Steel Standards
Designation Date Whitdrawn/Replaced by
JIS G 3421:1951 Withdrawn in: 1955-02-12 Replaced by: G3432;G3433;G3434;G3435;G3436
JIS G 3422:1951 Withdrawn in: 1955-02-12 Replaced by: G3433
JIS G 3423:1951 Withdrawn in: 1955-02-12 Replaced by: G3435
JIS G 3424:1951 Withdrawn in: 1955-02-12 Replaced by: G3436
JIS G 3425:1951 Withdrawn in: 1955-02-12 Replaced by: G3437
JIS G 3426:1951 Withdrawn in: 1955-02-12 Replaced by: G3438
JIS G 3427:1951 Withdrawn in: 1955-02-12 Replaced by: G3432
JIS G 3428:1950 Withdrawn in: 1956-04-18 Replaced by: G3440
JIS G 3430:1952 Withdrawn in: 1957-10-30 Replaced by: G3443
JIS G 3431:1952 Withdrawn in: 1957-10-30 Replaced by: G3443
JIS G 3432:1958 Withdrawn in: 1962-03-01 Replaced by: G3452
JIS G 3433:1958 Withdrawn in: 1962-03-01 Replaced by: G3454;G3456
JIS G 3434:1958 Withdrawn in: 1962-03-01 Replaced by: G3455
JIS G 3435:1958 Withdrawn in: 1962-03-01 Replaced by: G3458;G3459
JIS G 3436:1958 Withdrawn in: 1962-03-01 Replaced by: G3461;G3462;G3463
JIS G 3437:1965 Withdrawn in: 1968-05-01
JIS G 3438:1958 Withdrawn in: 1962-03-01 Replaced by: G3459;G3461;G3462;G3463
JIS G 3439:1988 Withdrawn in: 1996-01-01
JIS G 3440:1956 Withdrawn in: 1961-02-01 Replaced by: G3444;G3445
JIS G 3501:1953 Withdrawn in: 1956-08-21 Replaced by: G3505;G3506
JIS G 3524:1953 Withdrawn in: 1957-10-30 Replaced by: Z3211

JIS G 3526:1962 Withdrawn in: 1980-03-01
JIS G 3527:1951 Withdrawn in: 1954-01-30 Replaced by: G3532
JIS G 3528:1951 Withdrawn in: 1954-01-30 Replaced by: G3533
JIS G 3529:1951 Withdrawn in: 1954-01-30
JIS G 3530:1977 Withdrawn in: 1980-03-01
JIS G 3531:1977 Withdrawn in: 1980-03-01
JIS G 3534:1954 Withdrawn in: 1957-06-21 Replaced by: Z3201
JIS G 3534:1988 Withdrawn in: 1994-06-01
JIS G 3541:1988 Withdrawn in: 1992-02-01
JIS G 3565:1988 Withdrawn in: 1994-06-01
JIS G 3566:1988 Withdrawn in: 1994-06-01 Replaced by: G3561
JIS G 3567:1988 Withdrawn in: 1994-06-01 Replaced by: G3560
JIS G 3568:1989 Withdrawn in: 1994-06-01 Replaced by: G3560
JIS G 4102:1979 Withdrawn in: 2003-05-20 Replaced by: G 4053
JIS G 4103:1979 Withdrawn in: 2003-05-20 Replaced by: G 4053
JIS G 4104:1979 Withdrawn in: 2003-05-20 Replaced by: G 4053
JIS G 4105:1979 Withdrawn in: 2003-05-20 Replaced by: G 4053
JIS G 4106:1979 Withdrawn in: 2003-05-20 Replaced by: G 4053
JIS G 4201:1950 Withdrawn in: 1953-11-07 Replaced by: G3102;G4102;G4103;G4104;G4105
JIS G 4301:1955 Withdrawn in: 1959-12-01 Replaced by: G4303;G4304;G4305;G4306;G4307;G4308;G4309
JIS G 4302:1954 Withdrawn in: 1964-09-01 Replaced by: G4311;G4312
JIS G 4306:1988 Withdrawn in: 1991-11-01 Replaced by: G4304
JIS G 4307:1987 Withdrawn in: 1991-11-01 Replaced by: G4305
JIS G 4402:1953 Withdrawn in: 1956-04-18 Replaced by: G4404
JIS G 4405:1954 Withdrawn in: 1956-04-18
JIS G 4406:1954 Withdrawn in: 1956-04-18
JIS G 4407:1954 Withdrawn in: 1956-04-18 Replaced by: G4404
JIS G 5521:1977 Withdrawn in: 1983-02-01
JIS G 5522:1977 Withdrawn in: 1983-02-01
JIS G 5523:1977 Withdrawn in: 1983-02-01

JIS G 5524:1977 Withdrawn in: 1989-01-01
JIS G 5701:1952 Withdrawn in: 1960-03-01 Replaced by: G5702;G5703;G5704
JIS G 5702:1988 Withdrawn in: 2000-02-20 Replaced by: JIS G 5705:2000
JIS G 5703:1988 Withdrawn in: 2000-02-20 Replaced by: JIS G 5705:2000
JIS G 5704:1988 Withdrawn in: 2000-02-20 Replaced by: JIS G 5705:2000
JIS G 9071:1976 Withdrawn in: 1992-02-01
JIS G 9072:1976 Withdrawn in: 1992-02-01




Handbook of Comparative World Steel Standards
Appendix
5

CEN CURRENT STEEL STANDARDS

480 CEN Current Steel Standards Appendix 5


Handbook of Comparative World Steel Standards
Designation Title
EN ISO 683-17:1999 Heat-Treated Steels, Alloy Steels and Free-Cutting Steels – Ball and Roller Bearing Steels
EN ISO 1127:1996 Stainless Steel Tubes – Dimensions, Tolerances and Conventional Masses per Unit Length
EN ISO 4066:1999 Construction Drawings – Bar Scheduling
EN ISO 4957:1999 Tool Steels
EN ISO 7153-1:2000 Surgical Instruments. Metallic Materials – Part 1: Stainless Steel
EN ISO 11960:2001 Petroleum and Natural Gas Industries – Steel Pipes for Use as Casing or Tubing for Wells
EN 502:1999 Roofing Products from Metal Sheet – Specification for Fully Supported Products of Stainless Steel Sheet
EN 505:1999 Roofing Products from Metal Sheet – Specification for Fully Supported Roofing Products of Steel Sheet

EN 508-1:2000
Roofing Products from Metal Sheet v Specification for Self-Supporting Products of Steel, Aluminum or Stainless Steel
Sheet – Part 1: Steel
EN 523:2003 Steel Strip Sheaths for Prestressing Tendons – Terminology, Requirements, Quality Control
EN 524-1:1997 Steel Strip Sheaths for Prestressing Tendons – Test Methods – Part 1:Determination of Shape and Dimensions
EN 524-2:1997 Steel Strip Sheaths for Prestressing Tendons – Test Methods – Part 2: Determination of Flexural Behaviour
EN 524-3:1997 Steel Strip Sheaths for Prestressing Tendons – Test Methods – Part 2: To-and-Fro Bending Test
EN 524-4:1997 Steel Strip Sheaths for Prestressing Tendons – Test Methods – Part 2: Determination of Lateral Load Resistance
EN 524-5:1997 Steel Strip Sheaths for Prestressing Tendons – Test Methods – Part 2: Determination of Tensile Load Resistance
EN 524-6:1997
Steel Strip Sheaths for Prestressing Tendons – Test Methods – Part 2: Determination of Leaktightness
(Determination of Water Loss)
EN 1123-1:1999
Pipes and Fittings of Longitudinally Welded Hot-Dip Galvanized Steel Pipes with Spigot and Socket for Waste Water
Systems – Part 1: Requirements, Testing, Quality Control
EN 1123-2:1999
Pipes and Fittings of Longitudinally Welded Hot-Dip Galvanized Steel Pipes with Spigot and Socket for Waste Water
Systems – Part 2: Dimensions
EN 1124-1:1999
Pipes and Fittings of Longitudinally Welded Stainless Steel Pipes with Spigot and Socket for Waste Water Systems –
Part 1: Requirements, Testing, Quality Control
EN 1124-2:1999
Pipes and Fittings of Longitudinally Welded Stainless Steel Pipes with Spigot and Socket for Waste Water Systems –
Part 2: System S. Dimensions
EN 1124-3:1999
Pipes and Fittings of Longitudinally Welded Stainless Steel Pipes with Spigot and Socket for Waste Water Systems –
Part 3: System X; Dimensions
EN 1370:1996 Founding. Surface Roughness Inspection by Visual Tactile Comparators
EN 1503-1:2000 Valves. Materials for Bodies, Bonnets and Covers – Part 1: Steels Specified in European Standards
EN 1503-2:2000

Valves. Materials for Bodies, Bonnets and Covers – Part 2: Steels Other Than Those Specified in European
Standards
EN 1559-2:2000 Founding. Technical Conditions of Delivery – Part 2: Additional Requirements for Steel Castings
EN 1677-1:2000 Components for Slings – Safety – Part 1: Safety. Forged Steel Components, Grade 8
EN 1677-2:2000 Components for Slings – Safety – Part 2: Forged Steel Lifting Hooks with Latch, Grade 8
EN 10016-1:1994 Non-Alloy Steel Rods for Drawing and/or Cold Rolling – Part 1: General Requirements
EN 10016-2:1994 Non-Alloy Steel Rods for Drawing and/or Cold Rolling – Part 2: Specific Requirements for General Purpose Rod
EN 10016-3:1994
Non-Alloy Steel Rods for Drawing and/or Cold Rolling – Part 3: Specific Requirements for Rimmed and Rimmed
Substitute Low Carbon Steel Rod
EN 10016-4:1994
Non-Alloy Steel Rods for Drawing and/or Cold Rolling – Part 4: Specific Requirements for Rod for Special
Applications
EN 10024:1995 Hot Rolled Taper Flange I Sections – Tolerances On Shape and Dimensions
EN 10025:1990
Iron and Steel Products, Structural Steels, Non Alloy Steel, Hot Rolled Products, Quality Classes, Designation,
Specification, Chemical Composition, Mechanical Property, Mechanical Test, Inspection, Marking
EN 10028-1:2000 Flat Products Made of Steels for Pressure Purposes – Part 1: General Requirements
EN 10028-2:2003
Flat products Made of Steels for Pressure Purposes – Part 2: Non-Alloy and Alloy Steels with Specified Elevated
Temperature Properties
EN 10028-3:2003 Flat Products Made of Steels for Pressure Purposes – Part 3: Weldable Fine Grain Steels, Normalized
EN 10028-4:2003
Flat Products Made of Steels for Pressure Purposes – Part 4: Nickel alloy Steels with Specified Low Temperature
Properties
EN 10028-5:2003
Flat Products Made of Steels for Pressure Purposes – Part 5: Weldable Fine Grain Steels, Thermomechanically
Rolled
EN 10028-6:2003 Flat Products Made of Steels for Pressure Purposes – Part 6: Weldable Fine Grain Steels, Quenched and Tempered
EN 10028-7:2000 Flat Products Made of Steels for Pressure Purposes – Part 7: Stainless Steels

EN 10029:1991 Hot Rolled Steel Plates 3 mm Thick or Above – Tolerances on Dimensions, Shape and Mass
EN 10034:1993 Structural Steel I and H Sections – Tolerances On Shape and Dimensions
EN 10048:1996 Hot Rolled Narrow Steel Strip – Tolerances On Dimensions and Shape
EN 10051:1991
Continuously Hot-Rolled Uncoated Plate, Sheet and Strip of Non-Alloy and Alloy Steels – Tolerances On Dimensions
and Shape
EN 10055:1995
Hot Rolled Steel Equal Flange Tees with Radiused Root and Toes – Dimensions and Tolerances On Shape and
Dimensions
Appendix 5 CEN Current Steel Standards 481


Handbook of Comparative World Steel Standards
Designation Title
EN 10056-1:1998 Structural Steel Equal and Unequal Leg Angles – Part 1: Dimensions
EN 10056-2:1993 Structural Steel Equal and Unequal Leg Angles – Part 2: Tolerances on Shape and Dimensions
EN 10067:1996 Hot Rolled Bulb Flats – Dimensions and Tolerances On Shape, Dimensions and Mass
EN 10079:1992 Definition of Steel Products
EN 10083-1:1991 Quenched and Tempered Steels – Part 1: Technical Delivery Conditions for Special Steels
EN 10083-2:1991 Quenched and Tempered Steels – Part 2: Technical Delivery Conditions for Unalloyed Quality Steels
EN 10083-3:1995 Quenched and Tempered Steels – Part 3: Technical Delivery Conditions for Boron Steels
EN 10084:1998 Case Hardening Steels – Technical Delivery Conditions
EN 10085:2001 Nitriding Steel – Technical Delivery Conditions
EN 10087:1998 Free Cutting Steels. Technical Delivery Conditions for Semi-Finished Products, Hot Rolled Bars and Rods
EN 10088-1:1995 Stainless Steels – Part 1: List of Stainless Steels
EN 10088-2:1995 Stainless Steels – Part 2: Technical Delivery Conditions for Sheet/Plate and Strip for General Purposes
EN 10088-3:1995
Stainless Steels – Part 3: Technical Delivery Conditions for Semi-Finished Products, Bars, Rods and Sections for
General Purposes
EN 10090:1998 Valve Steels and Alloys for Internal Combustion Engines

EN 10095:1999 Heat Resisting Steels and Nickel Alloys
EN 10106:1995 Cold Rolled Non-Oriented Electrical Steel Sheet and Strip Delivered in the Fully Processed State
EN 10107:1995 Grain-Oriented Electrical Steel Sheet and Strip Delivered in the Fully Processed State
EN 10111:1998 Continuously Hot-Rolled Low Carbon Steel Sheet and Strip for Cold Forming – Technical Delivery Conditions
EN 10113-1:1993 Hot-Rolled Products in Weldable Fine Grain Structural Steels – Part 1: General Delivery Conditions
EN 10113-2:1993
Hot-Rolled Products in Weldable Fine Grain Structural Steels – Part 2: Delivery Conditions for Normalized/Normalized
Rolled Steels
EN 10113-3:1993
Hot-Rolled Products in Weldable Fine Grain Structural Steels – Part 3: Delivery Conditions for Thermomechanical
Rolled Steels
EN 10120:1996 Steel Sheet and Strip for Welded Gas Cylinders
EN 10126:1995 Cold Rolled Electrical Non-Alloyed Steel Sheet and Strip Delivered in the Semi-Processed State
EN 10130:1998 Cold-Rolled Low-Carbon Steel Flat Products for Cold Forming – Technical Delivery Conditions
EN 10131:1991
Cold-Rolled Uncoated Low Carbon and High Yield Strength Steel Flat Products for Cold Forming – Tolerances On
Dimensions and Shape
EN 10132-1:2000 Cold Rolled Narrow Steel Strip for Heat Treatment. Technical Delivery Conditions – Part 1: General
EN 10132-2:2000 Cold Rolled Narrow Steel Strip for Heat Treatment. Technical Delivery Conditions – Part 2: Case Hardening Steels
EN 10132-3:2000
Cold Rolled Narrow Steel Strip for Heat Treatment. Technical Delivery Conditions – Part 3: Steels for Quenching and
Tempering
EN 10132-4:2000
Cold Rolled Narrow Steel Strip for Heat Treatment. Technical Delivery Conditions – Part 4: Spring Steels and Other
Applications
EN 10137-1:1995
Plates and Wide Flats Made of High Yield Strength Structural Steels in the Quenched and Tempered or Precipitation
Hardened Conditions – Part 1: General Delivery Conditions
EN 10137-2:1995
Plates and Wide Flats Made of High Yield Strength Structural Steels in the Quenched and Tempered or Precipitation

Hardened Conditions – Part 2: Delivery Conditions for Quenched and Tempered Steels
EN 10137-3:1995
Plates and Wide Flats Made of High Yield Strength Structural Steels in the Quenched and Tempered or Precipitation
Hardened Conditions – Part 3: Delivery Conditions for Precipitation Hardened Steels
EN 10139:1997 Cold Rolled Uncoated Mild Steel Narrow Strip for Cold Forming – Technical Delivery Conditions
EN 10140:1996 Cold Rolled Narrow Steel Strip – Tolerances On Dimensions and Shape
EN 10142:2000
Continuously Hot-Dip Zinc Coated Low Carbon Steels Strip and Sheet for Cold Forming – Technical Delivery
Conditions
EN 10143:1993 Continuously Hot-Dip Metal Coated Steel Sheet and Strip – Tolerances On Dimensions and Shape
EN 10147:2000 Continuously Hot-Dip Zinc Coated Structural Steels Strip and Sheet – Technical Delivery Conditions
EN 10149-1:1995
Specification for Hot-Rolled Flat Products Made of High Yield Strength Steels for Cold Forming – Part 1: General
Delivery Conditions
EN 10149-2:1995
Specification for Hot-Rolled Flat Products Made of High Yield Strength Steels for Cold Forming – Part 2: Delivery
Conditions for Thermomechanically Rolled Steels
EN 10149-3:1995
Specification for Hot-Rolled Flat Products Made of High Yield Strength Steels for Cold Forming – Part 3: Delivery
Conditions for Normalized or Normalized Rolled Steels
EN 10152:2003 Electrolytically Zinc Coated Cold Rolled Steel Flat Products for Cold Forming – Technical Delivery Conditions
EN 10154:2002 Continuously Hot-Dip Aluminium-Silicon (AS) Coated Steel Strip and Sheet – Technical Delivery Conditions
EN 10155:1993 Structural Steels with Improved Atmospheric Corrosion Resistance – Technical Delivery Conditions
EN 10160:1999 Ultrasonic Testing of Steel Flat Product of Thickness Equal or Greater Than 6 Mm (Reflection Method)
EN 10163-1:1991
Specification for Delivery Requirements for Surface Condition of Hot Rolled Steel Plates, Wide Flats and Sections –
Part 1: General Requirements
482 CEN Current Steel Standards Appendix 5



Handbook of Comparative World Steel Standards
Designation Title
EN 10163-2:1991
Specification for Delivery Requirements for Surface Condition of Hot Rolled Steel Plates, Wide Flats and Sections –
Part 2: Plates and Wide Flats
EN 10163-3:1991
Specification for Delivery Requirements for Surface Condition of Hot Rolled Steel Plates, Wide Flats and Sections –
Part 3: Sections
EN 10164:1993
Steel Products with Improved Deformation Properties Perpendicular To the Surface of the Product – Technical
Delivery Conditions
EN 10165:1995 Cold Rolled Electrical Alloyed Steel Sheet and Strip Delivered in the Semi-Processed State
EN 10169-1:1997
Continuously Organic Coated (Coil Coated) Steel Flat Products – Part 1: General Information (Definitions, Materials,
Tolerances, Test Methods)
EN 10202:2001 Cold Reduced Tinmill Products – Electrolytic Tinplate and Electrolytic Chromium/Chromium Oxide Coated Steel
EN 10204:1991 Metallic Products. Types of Inspection Documents
EN 10205:1991
Cold Reduced Blackplate in Coil Form for the Production of Tinplate or Electrolytic Chromium/Chromium Oxide
Coated Steel
EN 10207:1992 Steels for Simple Pressure Vessels – Technical Delivery Requirements for Plates, Strips and Bars
EN 10208-1:1997
Steel Pipes for Pipelines for Combustible Fluids – Technical Delivery Conditions – Part 1: Pipes of Requirement Class
A
EN 10208-2:1996
Steel Pipes for Pipelines for Combustible Fluids – Technical Delivery Conditions – Part 2: Pipes of Requirement Class
B
EN 10209:1996 Cold Rolled Low Carbon Steel Flat Products for Vitreous Enamelling – Technical Delivery Conditions
EN 10210-1:1994
Hot Finished Structural Hollow Sections of Non-Alloy and Fine Grain Structural Steels – Part 1: Technical Delivery

Requirements
EN 10210-2:1997
Hot Finished Structural Hollow Sections of Non-Alloy and Fine Grain Structural Steels – Part 2: Tolerances,
Dimensions and Sectional Properties
EN 10213-1:1995 Technical Delivery Conditions for Steel Castings for Pressure Purposes – Part 1: General
EN 10213-2:1995
Technical Delivery Conditions for Steel Castings for Pressure Purposes – Part 2: Steel Grades for Use at Room
Temperature and at Elevated Temperature
EN 10213-3:1995 Technical Delivery Conditions for Steel Castings for Pressure Purposes – Part 3: Steels for Use at Low Temperatures
EN 10213-4:1995
Technical Delivery Conditions for Steel Castings for Pressure Purposes – Part 4: Austenitic and Austenitic-Ferritic
Steel Grades
EN 10214:1995 Continuously Hot-Dip Zinc-Aluminium (ZA) Coated Steel Strip and Sheet – Technical Delivery Conditions
EN 10215:1995 Continuously Hot-Dip Zinc-Aluminium (AZ) Coated Steel Strip and Sheet – Technical Delivery Conditions
EN 10218-1:1994 Steel Wire and Wire Products – General – Part 1: Test Methods
EN 10218-2:1997 Steel Wire and Wire Products – General – Part 2: Wire Dimensions and Tolerances
EN 10219-1:1997
Cold Formed Welded Structural Sections of Non-Alloy and Fine Grain Steels – Part 1: Technical Delivery
Requirements
EN 10219-2:1997
Cold Formed Welded Structural Sections of Non-Alloy and Fine Grain Steels – Part 2: Tolerances, Dimensions and
Sectional Properties
EN 10221:1995 Surface Quality Classes for Hot-Rolled Bars and Rods – Technical Delivery Conditions
EN 10222-1:2002 Steel Forgings for Pressure Purposes – Part 1: General Requirements for Open Die Forgings
EN 10222-2:1999
Steel Forgings for Pressure Purposes – Part 2: Ferritic and Martensitic Steels with Specified Elevated Temperature
Properties
EN 10222-3:1998 Steel Forgings for Pressure Purposes – Part 3: Nickel Steels with Specified Low-Temperature Properties
EN 10222-4:1998 Steel Forgings for Pressure Purposes – Part 4: Weldable Fine-Grain Steels with High Proof Strength
EN 10222-5:1999 Steel Forgings for Pressure Purposes – Part 5: Martensitic, Austenitic and Austenitic-Ferritic Stainless Steels

EN 10223-1:1997 Steel Wire and Wire Products for Fences – Part 1: Zinc and Zinc Alloy Coated Steel Barbed Wire
EN 10223-2:1997
Steel Wire and Wire Products for Fences – Part 2: Hexagonal Steel Wire Netting for Agricultural, Insulation and
Fencing Purposes
EN 10223-3:1997 Steel Wire and Wire Products for Fences – Part 3: Hexagonal Steel Wire Netting for Engineering Purposes
EN 10223-4:1998 Steel Wire and Wire Products for Fences – Part 4: Steel Wire Welded Mesh Fencing
EN 10223-5:1998 Steel Wire and Wire Products for Fences – Part 5: Steel Wire Woven Hinged Joint and Knotted Mesh Fencing
EN 10223-6:1998 Steel Wire and Wire Products for Fences – Part 6: Steel Wire Chain Link Fencing
EN 10228-1:1999 Non-Destructive Testing of Steel Forgings – Part 1: Magnetic Particle Inspection
EN 10228-2:1998 Non-Destructive Testing of Steel Forgings – Part 2: Penetrant Testing
EN 10228-3:1998 Non-Destructive Testing of Steel Forgings – Part 3: Ultrasonic Testing of Ferritic or Martensitic Steel Forgings
EN 10228-4:1999
Non-Destructive Testing of Steel Forgings – Part 4: Ultrasonic Testing of Austenitic and Austenitic-Ferritic Stainless
Steel Forgings
EN 10238:1996 Automatically Blast Cleaned and Automatically Primed Structural Steel Products
EN 10240:1997
Internal and/or External Protective Coatings for Steel Tubes – Specification for Hot Dip Galvanized Coatings Applied
in Automatic Plants
EN 10241:2000 Steel Threaded Pipe Fittings
EN 10243-1:1999 Steel Die Forgings. Tolerances On Dimensions – Part 1: Drop and Vertical Press Forgings
Appendix 5 CEN Current Steel Standards 483


Handbook of Comparative World Steel Standards
Designation Title
EN 10243-2:1999 Steel Die Forgings. Tolerances On Dimensions – Part 2: Upset Forgings Made On Horizontal Forging Machines
EN 10244-1:2001 Steel Wire and Wire Products – Non-Ferrous Metallic Coatings On Steel Wire – Part 1: General Principles
EN 10244-2:2001 Steel Wire and Wire Products – Non-Ferrous Metallic Coatings On Steel Wire – Part 2: Zinc or Zinc Alloy Coatings
EN 10244-3:2001 Steel Wire and Wire Products – Non-Ferrous Metallic Coatings On Steel Wire – Part 3: Aluminium Coatings
EN 10244-4:2001 Steel Wire and Wire Products – Non-Ferrous Metallic Coatings On Steel Wire – Part 4: Tin Coatings

EN 10244-5:2001 Steel Wire and Wire Products – Non-Ferrous Metallic Coatings On Steel Wire – Part 5: Nickel Coatings
EN 10244-6:2001
Steel Wire and Wire Products – Non-Ferrous Metallic Coatings On Steel Wire – Part 6: Copper, Bronze or Brass
Coatings
EN 10245-1:2001 Steel Wire and Wire Products – Organic Coatings On Steel Wire – Part 1: General Rules
EN 10245-2:2001 Steel Wire and Wire Products – Organic Coatings On Steel Wire – Part 1: PVC Finished Wire
EN 10245-3:2001 Steel Wire and Wire Products – Organic Coatings On Steel Wire – Part 1: PE Coated Wire
EN 10246-1:1996
Non-Destructive Testing of Steel Tubes – Part 1: Automatic Electromagnetic Testing of Seamless and Welded
(Except Submerged Arc Welded) Ferromagnetic Steel Tubes for Verification of Hydraulic Leak-Tightness
EN 10246-2:2000
Non-Destructive Testing of Steel Tubes – Part 2: Automatic Eddy Current Testing of Seamless and Welded (Except
Submerged Arc Welded) Austenitic and Austenitic-Ferritic Steel Tubes for Verification of Hydraulic Leak-Tightness
EN 10246-3:1999
Non-Destructive Testing of Steel Tubes – Part 3: Automatic Eddy Current Testing of Seamless and Welded (Except
Submerged Arc-Welded) Steel Tubes for the Detection of Imperfections
EN 10246-4:1999
Non-Destructive Testing of Steel Tubes – Part 4: Automatic Full Peripheral Magnetic Transducer/Flux Leakage
Testing of Seamless Ferromagnetic Steel Tubes for the Detection of Transverse Imperfections
EN 10246-5:1999
Non-Destructive Testing of Steel Tubes – Part 5: Automatic Full Peripheral Magnetic Transducer/Flux Leakage
Testing of Seamless and Welded (Except Submerged Arc-Welded) Ferromagnetic Steel Tubes for the Detection of
Longitudinal Imperfections
EN 10246-6:1999
Non-Destructive Testing of Steel Tubes – Part 6: Automatic Full Peripheral Ultrasonic Testing of Seamless Steel
Tubes for the Detection of Transverse Imperfections
EN 10246-7:1996
Non-Destructive Testing of Steel Tubes – Part 7: Automatic Full Peripheral Ultrasonic Testing of Seamless and
Welded (Except Submerged Arc Welded) Steel Tubes for the Detection of Longitudinal Imperfections
EN 10246-8:1999

Non-Destructive Testing of Steel Tubes – Part 8: Automatic Ultrasonic Testing of the Weld Seam of Electric Welded
Steel Tubes for the Detection of Longitudinal Imperfections
EN 10246-9:2000
Non-Destructive Testing of Steel Tubes – Part 9: Automatic Ultrasonic Testing of the Weld Seam of Submerged Arc
Welded Steel Tubes for the Detection of Longitudinal and/or Transverse Imperfections
EN 10246-10:2000
Non-Destructive Testing of Steel Tubes – Part 10: Radiographic Testing of the Weld Seam of Automatic Fusion Arc
Welded Steel Tubes for the Detection of Imperfections
EN 10246-11:2000
Non-Destructive Testing of Steel Tubes – Part 11: Liquid Penetrant Testing of Seamless and Welded Steel Tubes for
the Detection of Surface Imperfections
EN 10246-12:2000
Non-Destructive Testing of Steel Tubes – Part 12: Magnetic Particle Inspection of Seamless and Welded
Ferromagnetic Steel Tubes for the Detection of Surface Imperfections
EN 10246-13:2000
Non-Destructive Testing of Steel Tubes – Part 13: Automatic Full Peripheral Ultrasonic Thickness Testing for
Seamless and Welded (Except Submerged Arc Welded) Steel Tubes
EN 10246-14:1999
Non-Destructive Testing of Steel Tubes – Part 14: Automatic Ultrasonic Testing of Seamless and Welded (Except
Submerged Arc-Welded) Steel Tubes for the Detection of Laminar Imperfections
EN 10246-15:2000
Non-Destructive Testing of Steel Tubes – Part 15: Automatic Ultrasonic Testing of Strip/Plate Used in the
Manufacture of Welded Steel Tubes for the Detection of Laminar Imperfections
EN 10246-16:2000
Non-Destructive Testing of Steel Tubes – Part 16: Automatic Ultrasonic Testing of the Area Adjacent To the Weld
Seam of Welded Steel Tubes for the Detection of Laminar Imperfections
EN 10246-17:2000
Non-Destructive Testing of Steel Tubes – Part 17: Ultrasonic Testing of Tube Ends of Seamless and Welded Steel
Tubes for the Detection of Laminar Imperfections
EN 10246-18:2000

Non-Destructive Testing of Steel Tubes – Part 18: Magnetic Particle Inspection of Tube Ends of Seamless and
Welded Ferromagnetic Steel Tubes for the Detection of Laminar Imperfections
EN 10248-1:1995 Hot Rolled Sheet Piling of Non Alloy Steels – Part 1: Technical Delivery Conditions
EN 10248-2:1995 Hot Rolled Sheet Piling of Non Alloy Steels – Part 2: Tolerances On Shape and Dimensions
EN 10249-1:1995 Cold Formed Sheet Piling of Non Alloy Steels – Part 1: Technical Delivery Conditions
EN 10249-2:1995 Cold Formed Sheet Piling of Non Alloy Steels – Part 2: Tolerances On Shape and Dimensions
EN 10250-1:1999 Open Steel Die Forgings for General Engineering Purposes – Part 1: General Requirements
EN 10250-2:1999 Open Steel Die Forgings for General Engineering Purposes – Part 2: Non-Alloy Quality and Special Steels
EN 10250-3:1999 Open Steel Die Forgings for General Engineering Purposes – Part 3: Alloy Special Steels
EN 10250-4:1999 Open Steel Die Forgings for General Engineering Purposes – Part 4: Stainless Steels
EN 10251:1997 Magnetic Materials – Methods of Determination of the Geometrical Characteristics of Electrical Steel Sheet and Strip
EN 10252:1997
Magnetic Materials – Methods of Measurement of Magnetic Properties of Magnetic Steel Sheet and Strip at Medium
Frequencies
EN 10253-1:1999
Butt-Welding Pipe Fittings – Part 1: Wrought Carbon Steel for General Use and Without Specific Inspection
Requirements
EN 10254:1999 Steel Closed Die Forgings – General Technical Delivery Conditions
484 CEN Current Steel Standards Appendix 5


Handbook of Comparative World Steel Standards
Designation Title
EN 10256:2000
Non-Destructive Testing On Steel Tubes – Qualification and Competence of Level 1 and Level 2 Non-Destructive
Testing Personnel
EN 10257-1:1998
Zinc or Zinc Alloy Coated Non-Alloy Steel Wire for Armouring Either Power Cables or Telecommunication Cables –
Part 1: Land Cables
EN 10257-2:1998

Zinc or Zinc Alloy Coated Non-Alloy Steel Wire for Armouring Either Power Cables or Telecommunication Cables –
Part 2: Submarine Cables
EN 10258:1997 Cold-Rolled Stainless Steel Narrow Strip and Cut Lengths – Part 1: Tolerances On Dimensions and Shape
EN 10259:1997 Cold-Rolled Stainless and Heat Resisting Steel Wide Strip and Plate/Sheet – Tolerances On Dimensions and Shape
EN 10267:1998 Ferritic-Pearlitic Steels for Precipitation Hardening from Hot-Working Temperatures
EN 10268:1998
Cold-Rolled Flat Products Made of High Yield Strength Micro-Alloyed Steels for Cold Forming – General Delivery
Conditions
EN 10269:1999 Steels and Nickel Alloys for Fasteners with Specified Elevated and/or Low Temperature Properties
EN 10270-1:2001 Steel Wire for Mechanical Springs – Part 1: Patented Cold Drawn Unalloyed Spring Steel Wire
EN 10270-2:2001 Steel Wire for Mechanical Springs – Part 2: Oil Hardened and Tempered Spring Steel Wire
EN 10270-3:2001 Steel Wire for Mechanical Springs – Part 3: Stainless Spring Steel Wire
EN 10271:1998 Electrolytically Zinc-Nickel (ZN) Coated Steel Flat Products – Technical Delivery Conditions
EN 10272:2000 Stainless Steel Bars for Pressure Purposes
EN 10273:2000 Hot Rolled Weldable Steel Bars for Pressure Purposes with Specified Elevated Temperature Properties
EN 10277-1:1999 Bright Steel Products – Part 1: Technical Delivery Conditions. General
EN 10277-2:1999 Bright Steel Products – Part 2: Technical Delivery Conditions. Steels for General Engineering Purposes
EN 10277-3:1999 Bright Steel Products – Part 3: Technical Delivery Conditions. Free Cutting Steels
EN 10277-4:1999 Bright Steel Products – Part 4: Technical Delivery Conditions. Case-Hardening Steels
EN 10277-5:1999 Bright Steel Products – Part 5: Technical Delivery Conditions. Steels for Quenching and Tempering
EN 10278:1999 Dimensions and Tolerances of Bright Steel Products
EN 10279:2000 Hot Rolled Steel Channels – Tolerances On Shape, Dimension and Mass
EN 10283:1998 Corrosion Resistant Steel Castings
EN 10292:2000
Continuously Hot-Dip Coated Strip and Sheet of Steels with Higher Yield Strength for Cold Forming – Technical
Delivery Conditions
EN 10303:2001 Thin Magnetic Steel Sheet and Strip for Use at Medium Frequencies
EN 12007-3:2000
Gas Supply Systems – Pipelines for Maximum Operating Pressure Up To and Including 16 Bar – Part 3: Specific
Functional Recommendations for Steel

EN 12269-1:2000
Determination of the Bond Behaviour Between Reinforcing Steel and Autoclaved Aerated Concrete by the "Beam
Test" – Part 1: Short Term Test
EN 12454:1998 Founding – Visual Examination of Surface Discontinuities – Steel Sand Castings
EN 10142:1990
Continuously Hot-Dip Zinc Coated Low Carbon Steel Sheet and Strip for Cold Forming – Technical Delivery
Conditions
EN 10147:1991 Continuously Hot-Dip Zinc Coated Structural Steel Sheet and Strip – Technical Delivery Conditions
EN 10202:2001 Cold Reduced Tinmill Products – Electrolytic Tinplate and Electrolytic Chromium/Chromium Oxide Coated Steel




Handbook of Comparative World Steel Standards
Appendix
6

CEN STANDARDS WITH SUPERSEDED
FORMER NATIONAL STANDARDS

486 CEN Standards With Superseded Former National Standards Appendix 6


Handbook of Comparative World Steel Standards
Chapter 2: Carbon and Alloy Steels for General Use
Current CEN Standard Former National Standards Superseded by CEN Standards
EN 10083–1:1991+A1:1996 Quenched and Tempered Steels – Part
1: Technical Delivery Conditions for Special Steels

EN 10083–2:1991+A1:1996 Quenched and Tempered Steels – Part

2: Technical Delivery Conditions for Unalloyed Quality Steels
Supersedes:

BSI BS 970-1:1983 Wrought Steels for Mechanical and Allied
Engineering Purposes – Part 1: General Inspection and Testing
Procedures and Specific Requirements for Carbon, Carbon
Manganese, Alloy and Stainless Steels
EN 10084:1998 Case Hardening Steels – Technical Delivery
Conditions
Supersedes:

BSI BS 970-1:1996 Wrought Steels for Mechanical and Allied
engineering Purposes –
Part 1: General Inspection And Testing
Procedures and Specific Requirements for Carbon, Carbon
Manganese, Alloy and Stainless Steels
EN 10016-1:1995 Non-Alloy Steel Rod for Drawing or Cold Rolling –
Part 1: General Requirements

EN 10016-2:1995 Non-Alloy Steel Rod for Drawing or Cold Rolling; –
Part 2: Specific Requirements for General Purpose Rod
Supersedes:

DIN 17140-1:1983 Wire Rod for Cold Drawing – Technical Delivery
Conditions for Basic Steel and Unalloyed Quality Steels
EN 10016-2:1995 Non-Alloy Steel Rod for Drawing and/or Cold
Rolling – Part 2: Specific Requirements for General Purposes Rod.
Supersedes:

AFNOR NF A35-051:1982 Fil Machine en Acier Non Allié Destiné au

Tréfilage et au Laminage à Froid – Nuances
EN 10083-1:1991 Quenched And Tempered Steels – Part 1:
Technical Delivery Conditions For Specials Steels.
Supersedes:

AFNOR NF EN 10083-1:1991 Aciers pour Trempe et Revenu –
Partie 1: Conditions Techniques de Livraison des Aciers Spéciaux
EN 10083-2:1991 Quenched And Tempered Steels – Part 2:
Technical Delivery Conditions For Unalloyed Quality Steels.
Supersedes:

AFNOR NF EN 10083-2:1991 Aciers pour Trempe et Revenu –
Partie 2: Conditions Techniques de Livraison des Aciers de Qualité
Non Alliés

AFNOR NF A33-101:1982 Aciers au Carbone de Qualité Aptes au
Forgeage et aux Traitements Thermiques – Demi Produits, Barres et
Fil Machine
EN 10084:1998 Case Hardening Steels – Technical Delivery
Conditions
Supersedes:

AFNOR NF A35-551:1986 Aciers de Construction Non Alliés et
Alliés Spéciaux pour Cémentation – Nuances - Demi-Produits,
Barres et Fils Machine

Appendix 6 CEN Standards With Superseded Former National Standards 487




Handbook of Comparative World Steel Standards
Chapter 3: Structural Steel Plates
Current CEN Standards Former National Standards Superseded by CEN Standards
EN 10025:1993 Hot Rolled Products of Non-Alloy Structural Steels –
Technical Delivery Conditions
Supersedes:

BSI BS 4360:1986 Weldable Structural Steels (Withdrawn)
EN 10113 Hot-Rolled Products in Weldable Fine Grain Structural
Steels

EN 10113-1:1993 General Delivery Conditions

EN 10113-2:1993 Delivery Conditions for Normalized/Normalized
Rolled Steels

EN 10113-3:1993 Delivery Conditions for Thermomechanical Rolled
Steels

EN 10155:1993 Structural Steels with Improved Atmospheric
Corrosion Resistance – Technical Delivery Conditions
Supersedes:

BSI BS 4360:1990 Weldable Structural Steels (Withdrawn)
EN 10137 Plates and Wide Flats Made of High Yield Strength
Structural Steels in the Quenched and Tempered or Precipitation
Hardened Conditions

EN 10137-1:1996 General Delivery Conditions


EN 10137-2:1996 Delivery Conditions for Quenched and Tempered
Steels

EN 10137-3:1996 Delivery Conditions for Precipitation Hardened
Steels
Supersedes:

BSI BS 7613:1994 Hot Rolled Quenched and Tempered Weldable
Structural Steel Plates (Withdrawn)
EN 10025:1993 Hot Rolled Products of Non-Alloy Structural Steels -
Technical Delivery Conditions
Supersedes:

DIN 17100:1980 Steels for General Structural Purposes; Quality
Standard (Withdrawn)
EN 10113 Hot Rolled Products Made from Weldable, Fine Grain
Structural Steel;

EN 10113-1:1993 General Technical Delivery Conditions

EN 10113-2:1993 Delivery Conditions for Normalized/Normalized
Rolled Steels

EN 10028 Flat Products Made from Steel for Pressure Purposes

EN 10028-1:2000 General Requirements

EN 10028-3:2003 Weldable Fine Grain Steels, Normalized
Supersedes :


DIN 17102:1983 Weldable Normalized Fine Grain Structural Steels;
Technical Delivery Conditions for Plate, Strip, Wide Flats, Sections
and Bars (Withdrawn)
EN 10113 Hot-Rolled Products in Weldable Fine Grain Structural
Steels

EN 10113-2:1993 Delivery Conditions for Normalized/Normalized
Rolled Steels.
Supersedes :

AFNOR NF A 35-504:1984 Poutrelles et Profils en Aciers à Haute
Limite d’Élasticité pour Constructions Soudées – Nuances et
Qualités

AFNOR NF A 36-201:1984 Tôles en Aciers à Haute Limite
d’Élasticité pour Constructions Soudées – Nuances et Qualités

488 CEN Standards With Superseded Former National Standards Appendix 6


Handbook of Comparative World Steel Standards
Chapter 3: Structural Steel Plates (Continued)
Current CEN Standards Former National Standards Superseded by CEN Standards
EN 10137 Plates and Wide Flats Made of High Yield Strength
Structural Steels in the Quenched and Tempered or Precipitation
Hardened Conditions

EN 10137-2:1996 Delivery Conditions for Quenched and Tempered
Steels
EN 10137-3:1996 Delivery Conditions for Precipitation Hardened

Steels
Supersedes:

AFNOR NF A 36-204:1992 Produits Sidérurgiques – Tôles en Aciers
à Haute Limite d’Élasticité Livrées à l’État Traité pour Construction
Soudée – Nuances et Qualité
EN 10155 :1993 Structural Steels With Improved Atmospheric
Corrosion Resistance – Technical Delivery Conditions
Supersedes :

AFNOR NF A35-502 :1984 Aciers de Construction à Résistance
Améliorée à la Corrosion Atmosphérique – Tôles Minces Moyennes
et Fortes, Larges Plats, Laminés Marchands et Poutrelles

Appendix 6 CEN Standards With Superseded Former National Standards 489



Handbook of Comparative World Steel Standards
Chapter 4: Pressure Vessel Steel Plates
Current CEN Standard Former National Standards Superseded by CEN Standards
EN 10028 Flat Products Made of Steels for Pressure Purposes.

EN 10028-2 :2003 Non-Alloy and Alloy Steels with Specified
Elevated Temperature Properties

EN 10028-3 :2003 Weldable Fine Grain Steels, Normalized
Supersedes :

BSI BS 1501 Steels for Pressure Purposes.


BSI BS 1501-1 :1980 Carbon and Carbon Manganese Steels :
Plates (Withdrawn)

BSI BS 1501-2 :1988 Alloy Steels : Plates (Withdrawn)
EN 10028-4 :1995 Flat Products Made of Steels for Pressure
Purposes – Part 4 : Nickel Alloy Steels with Specified Low
Temperature Properties
Supersedes :

BSI BS 1501-2 :1988 Steels for Pressure Purposes –
Part 2 :
Specification for Alloy Steels : Plates (Withdrawn)
EN 10028-1 :2000 Flat Products Made of Steels for Pressure
Purposes – Part 1 : General Requirements
Supersedes :

BSI BS 1501-1 :1980 Steels For Pressure Purposes –
Part 1 :
Specification for Carbon and Carbon Manganese Steels : Plates
(Withdrawn)

BSI BS 1501-2 :1988 Steels for Pressure Purposes –
Part 2 :
Specification for Alloy Steels : Plates (Withdrawn)
EN 10028-7 :2000 Flat Products Made of Steels for Pressure
Purposes – Part 7 : Stainless Steels
Supersedes :

BSI BS 1501-3 :1990 Amd 5 Steels for Pressure Purposes –

Part 3 :
Specification for Corrosion- and Heat-Resisting Steels : Plates,
Sheet and Strip (Withdrawn)
EN 10028 Flat Products Made from Steel for Pressure Purposes;

EN 10028-1 :2000 General requirements

EN 10028-2 :2003 Unalloyed and Alloy Steels with Elevated
Temperature Properties
Supersedes :

DIN 17155 :1983 Weldable Normalized Fine Grain Structural Steels;
Technical Delivery Conditions for Plate Strip, Wide Flats, Sections
and Bars
EN 10028 :1993 Flat Products Made from Steel for Pressure
Purposes

EN 10028-1 : 2000 General requirements

EN 10028-3 :2003 Weldable, Normalized, Fine Grain Steels

EN 10113 :1993 Hot Rolled Products Made from Weldable, Fine
Grain Structural Steel

EN 10113-1 :1993 General Technical Delivery Conditions

EN 10113-2 :1993 Technical Delivery Conditions for Normalized
Rolled Steel
Supersedes :


DIN 17102 :1983 Creep Resistant Steel Plate and Strip; Technical
Delivery Conditions
EN 10028-4 :2003 Flat Products Made of Steels for Pressure
Purposes – Part 4 : Nickel-Alloy Steels with Specified Low
Temperature Properties

EN 10028-1 :2000 Flat Products Made of Steel for Pressure
Purposes – Part 1 : General Requirements
Partially Supersedes :

DIN 17280 :1985 Steels With Low Temperature Toughness;
Technical Delivery Conditions for Plate. Sheet, Strip, Wide
Flats,Sections,Bars and Forgings

490 CEN Standards With Superseded Former National Standards Appendix 6


Handbook of Comparative World Steel Standards
Chapter 4: Pressure Vessel Steel Plates (Continued)
Current CEN Standard Former National Standards Superseded by CEN Standards
EN 10028-7:2000 Flat Products Made of Steels for Pressure – Part
7: Purposes Stainless Steels
Supersedes:

DIN 17441:1997 Technical Delivery Conditions for Stainless Steel
Cold-Rolled Strip, Slit Strip and Plate Cut Therefrom for Pressure
Purposes

Partially Supersedes:


DIN 17440:1996 Technical Delivery Conditions for Stainless Steel
Plate, Hot Rolled Strip, and Bars for Pressure Purposes

DIN 17460:1992 High-Temperature Austenitic Steel Plate and Sheet,
Cold and Hot Rolled Strip, Bars and Forgings; Technical Delivery
Conditions
EN 10028-2:2003 Flat Products Made of Steels for Pressure
Purposes – Part 2: Non-Alloy and Alloy Steels with Specified
Elevated Temperature Properties.
Supersedes:

AFNOR NF A36-205:1982 Iron and steel products: steel plates for
boilers and pressure vessels; carbon and carbon manganese steels,
grades and qualities

AFNOR NF A36-206:1983 Iron and steel products: steel plates for
boilers and pressure vessels; Mo, Mn-Mo and Cr-Mo alloy steels,
grades and qualities
EN 10028-3:2003 Flat Products Made of Steels for Pressure
Purposes – Part 3: Weldable Fine Grain Steels, Normalized.
Supersedes:

AFNOR NF A36-207:1982 Iron and steel products: high yield
strength steel plates for pressure vessels; grades and qualities (July)
EN 10028-4:2003 Flat Products Made of Steels for Pressure
Purposes – Part 4: Nickel Alloy Steels with Specified Low
Temperature Properties.
Supersedes:

AFNOR NF A36-208:1982 Tôles en Aciers au Nickel pour Appareils

à Pression à Basse Température
EN 10028-7:2000 Flat Products Made of Steels for Pressure
Purposes – Part 7: Stainless Steels
Partially Supersedes:

AFNOR NF A36-209:1990 Austenitic and Austenic-Ferritic Stainless
Steels Plates for Boilers and Pressure Vessels

Appendix 6 CEN Standards With Superseded Former National Standards 491



Handbook of Comparative World Steel Standards
Chapter 5: Steel Tubes and Pipes
Current CEN Standard Former National Standards Superseded by CEN Standards
EN 10208-1:1997 Steel Pipes for Pipe Lines for Combustible Fluids
– Technical Delivery Conditions – Part 1: Pipes of Requirement
Class A
Supersedes:

DIN 1626:1984 Welded Circular Unalloyed Steel Tubes Subject to
Special Requirements

DIN 1629:1984 Seamless Circular Unalloyed Steel Tubes Subject to
Special Requirements
EN 10216-1:2002 Seamless Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 1: Non-Alloy Steel Tubes with
Specified Room Temperature Properties
Supersedes:


AFNOR NF A49-111:1978 Plain end seamless tubes of commercial
quality for general purposes at mean pressure

AFNOR NF A49-112:1987 Plain end seamless hot rolled tubes with
specified room temperature properties and with special delivery
conditions – Dimensions – Technical delivery conditions

BSI BS 3059-1:1987 Steel Boiler and Superheater Tubes –
Part 1: Specification for Low Tensile Carbon Steel Tubes Without
Specified Elevated Temperature Properties

BSI BS 3601:1987 Carbon Steel Pipes and Tubes with Specified
Room Temperature Properties for Pressure Purposes

DIN 1626:1984 Welded Circular Unalloyed Steel Tubes Subject to
Special Requirements

DIN 1629:1984 Seamless Circular Unalloyed Steel Tubes Subject to
Special Requirements
EN 10216-2:2002 Seamless Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 2: Non-Alloy and Alloy Steel
Tubes with Specified Elevated Temperature Properties
Supersedes:

AFNOR NF A 49-210:1985 Steel Tubes: Seamless Cold Drawn
Tubes for Fluid Piping – Dimensions – Technical Delivery Conditions

AFNOR NF A 49-211:1989 Steel Tubes; Seamless Plain-End Tubes
in Unalloyed Steels for Fluid Piping at Elevated Temperatures –
Dimensions – Technical Delivery Conditions


AFNOR NF A 49-213:1990 Seamless Unalloyed and Mo and Cr-Mo
Alloyed Steel Tubes for Use at High Temperatures – Dimensions
(With Normal Tolerances) – Technical Delivery Conditions

AFNOR NF A 49-215:1981 Seamless Tubes for Ferritic Non-Alloy
and Alloy Steel Heat Exchangers – Dimensions – Technical Delivery
Conditions

AFNOR NF A 49-219:1990 Non-Alloy and Mo and Cr-Mo Alloy Steel
Seamless Tubes for Furnaces – Dimensions – Technical Delivery
Conditions

BSI BS 3059-2:1990 Steel Boiler and Superheater Tubes Part 2:
Carbon, Alloy and Austenitic Stainless Steel Tubes with Specified
Elevated Temperature Properties

BSI BS 3602-1:1987 Steel Pipes and Tubes for Pressure Purposes
Carbon and Carbon Manganese Steel with Specified Elevated
Temperature Properties: Seamless, Electric Resistance Welded and
Induction Welded Tubes (Withdrawn)

BSI BS 3606:1992 Steel Tubes for Heat Exchangers (Withdrawn)

492 CEN Standards With Superseded Former National Standards Appendix 6


Handbook of Comparative World Steel Standards
Chapter 5: Steel Tubes and Pipes (continued)
Current CEN Standard Former National Standards Superseded by CEN Standards

EN 10216-2:2002 Seamless Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 2: Non-Alloy and Alloy Steel
Tubes with Specified Elevated Temperature Properties
Supersedes:

BSI BS 3604-1:1990 Steel Pipes and Tubes for Pressure Purposes:
Ferritic Alloy Steel with Specified Elevated Temperature Properties –
Part 1: Specification for Seamless and Electric Resistance Welded
Tubes (Withdrawn)

DIN 17175:1979 Seamless Tubes of Heat-resistant Steels
EN 10216-3:2002 Seamless Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 3: Alloy Fine Grain Steel Tubes
Supersedes:

DIN 17179:1986 Seamless Circular Fine Grain Steel Tubes Subject
to Special Requirements – Technical Delivery Conditions
EN 10216-4:2002 Seamless Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 4: Non-alloy and Alloy Steel
Tubes with Specified Low Temperature Properties
Supersedes:

AFNOR NF A 49-230:1985 Steel Tubes: Plain End Seamless Tubes
for Pressure Vessels and Piping Systems Used at Low
Temperatures – Dimensions – Technical Delivery Conditions

BSI BS 3603:1991 Carbon and Alloy Steel Pipes and Tubes with
Specified Low Temperature Properties for Pressure Purpose
(Withdrawn)


DIN 17173:1985 Seamless Circular Tubes Made from Steels with
Low Temperature Toughness
EN 10217-1:2002 Welded Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 1: Non-Alloy Steel Tubes with
Specified Room Temperature Properties
Supersedes:

AFNOR NF A 49-142:1987 Longitudinally Pressure Welded Plain
Ended and Hot Finished Tubes. Diameters from 13,5 to 168,3 mm
With Specified Room Temperature Properties and with Special
Delivery Conditions – Dimensions – Technical Delivery Conditions

BSI BS 3059-1:1987 Steel Boiler and Superheater Tubes –
Part 1: Specification for Low Tensile Carbon Steel Tubes Without
Specified Elevated Temperature Properties

BSI BS 3601:1987 Carbon Steel Pipes and Tubes with Specified
Room Temperature Properties for Pressure Purposes

DIN 1626:1984 Welded Circular Unalloyed Steel Tubes Subject to
Special Requirements

DIN 1628:1984 High Performance Welded Circular Unalloyed Steel
Tubes – Technical Delivery Conditions

DIN 1629:1984 Seamless Circular Unalloyed Steel Tubes Subject to
Special Requirements
EN 10217-2:2002 Welded Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 2: Electric Welded Non-Alloy
and Alloy Steel Tubes with Specified Elevated Temperature

Properties
Supersedes:

AFNOR NF A 49-241:1986 Steel Tubes - Longitudinally Pressure
Welded Plain End Tubes in Non-Alloyed Steel Grades for Fluid
Piping Up to 425°C – Diameters from 21.3 mm to 168.3 mm –
Dimensions – Technical Delivery Conditions

AFNOR NF A 49-242:1985 Longitudinally Pressure Welded Tubes D
Inferior or Equal to 168.3 mm in Non-Alloyed and Low Alloyed Steels
Used at Medium Elevated Temperatures – Dimensions – Technical
Delivery Conditions

Appendix 6 CEN Standards With Superseded Former National Standards 493



Handbook of Comparative World Steel Standards
Chapter 5: Steel Tubes and Pipes (continued)
Current CEN Standard Former National Standards Superseded by CEN Standards
EN 10217-2:2002 Welded Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 2: Electric Welded Non-Alloy
and Alloy Steel Tubes with Specified Elevated Temperature
Properties
Supersedes:

AFNOR NF A 49-243:1985 Longitudinally Ppressure Welded Tubes
D Inferior or Equal to 168.3 mm in Non-Alloyed and Ferritic Alloyed
Steels, Used at Elevated Temperatures – Dimensions – Technical
Delivery Conditions


AFNOR NF A 49-245:1986 Longitudinally Pressure Welded Tubes
from Non-Alloy and Ferritic Alloy Steels for Heat Exchangers in
Diameters from 15.9 mm and 76.1 mm Inclusive – Dimensions –
Technical Delivery Conditions

AFNOR NF A 49-252:1982 Welded Non-Alloy Steel Tubes of
Diameters 168.3 mm to 1220 mm Used at Averagely Elevated
Temperatures – Dimensions – Technical Delivery Conditions

AFNOR NF A 49-253:1982 Longitudinally Fusion Welded Non-Alloy
Steel and Ferritic Alloy Steel Tubes for Use at Elevated
Temperatures – Dimensions – Technical Delivery Conditions

BSI BS 3059-2:1990 Steel Boiler and Superheater Tubes Part 2:
Carbon, Alloy and Austenitic Stainless Steel Tubes with Specified
Elevated Temperature Properties

BSI BS 3602-1:1987 Steel Pipes and Tubes for Pressure Purposes
Carbon and Carbon Manganese Steel with Specified Elevated
Temperature Properties – Part 1: Seamless, Electric Resistance
Welded and Induction Welded Tubes (Withdrawn)

BSI BS 3604-1:1990 Steel Pipes and Tubes for Pressure Purposes:
Ferritic Alloy Steel with Specified Elevated Temperature Properties –
Part 1: Specification for Seamless and Electric Resistance Welded
Tubes (Withdrawn)

BSI BS 3606:1992 Steel Tubes for Heat Exchangers (Withdrawn)


DIN 17177:1979 Electric Pressure-Welded Steel Tubes for Elevated
Temperatures
EN 10217-3:2002 Welded Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 3: Alloy Fine Grain Steel Tubes
Supersedes:

BSI BS 3602-2:1991 Steel Pipes and Tubes for Pressure Purposes:
Carbon and Carbon Manganese Steel with Specified Elevated
Temperature Properties – Part 2: Specification for Longitudinally Arc
Welded Tubes (Withdrawn)

DIN 17178:1986 Welded Circular Fine Grain Steel Tubes Subject to
Special requirements – Technical Delivery Conditions
EN 10217-4:2002 Welded Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 4: Electric Welded Non-Alloy
Steel Tubes with Specified Low Temperature Properties
Supersedes:

AFNOR NF A 49-240:1983 Steel Tubes: Plain Ended Steel Tubes
Longitudinally Welded Without Fusion for Pressure Vessels and
Piping Systems at Low Temperatures – Dimensions – Technical
Delivery Conditions

BSI BS 3603:1991 Carbon and Alloy Steel Pipes and Tubes with
Specified Low Temperature Properties for Pressure Purpose
(Withdrawn)

DIN 17174:1985 Welded Circular Tubes of Heat-Resistant Steels

494 CEN Standards With Superseded Former National Standards Appendix 6



Handbook of Comparative World Steel Standards
Chapter 5: Steel Tubes and Pipes (continued)
Current CEN Standard Former National Standards Superseded by CEN Standards
EN 10217-5:2002 Welded Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 5: Submerged Arc Welded
Non-Alloy and Alloy Steel Tubes with Specified Elevated
Temperatures Properties
Supersedes:

AFNOR NF A 49-252:1982 Welded Non-Alloy Steel Tubes of
Diameters 168.3 mm to 1220 mm Used at Averagely Elevated
Temperatures – Dimensions – Technical Delivery Conditions
EN 10217-5:2002 Welded Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 5: Submerged Arc Welded
Non-Alloy and Alloy Steel Tubes with Specified Elevated
Temperatures Properties
Supersedes:

AFNOR NF A 49-253:1982 Longitudinally Fusion Welded Non-Aalloy
Steel and Ferritic Alloy Steel Tubes for Use at Elevated
Temperatures – Dimensions – Technical Delivery Conditions

BSI BS 3602-2:1991 Steel Pipes and Tubes for Pressure Purposes:
Carbon and Carbon Manganese Steel with Specified Elevated
Temperature Properties – Part 2: Specification for Longitudinally Arc
Welded Tubes (Withdrawn)
EN 10217-6:2002 Welded Steel Tubes for Pressure Purposes –
Technical Delivery Conditions – Part 6: Submerged Arc Welded

Non-Alloy Steel Tubes with Specified Low Temperature Properties
Supersedes:

DIN 17174:1985 Welded Circular Tubes of Hear-Resistant Steels
EN 10224:2002 Non-Alloy Steel Tubes and Fittings for the
Conveyance of Aqueous Liquids Including Water for Human
Consumption – Technical Delivery Conditions
Supersedes:

AFNOR NF A 49-150:1985 Steel Tubes. Welded Tubes Intended to
be Coated or Protected for Use in Water Piping Systems –
Dimensions – Technical Delivery Conditions.

DIN 1626:1984 Welded Circular Unalloyed Steel Tubes Subject to
Special Requirements

DIN 1628:1984 High Performance Welded Circular Unalloyed Steel
Tubes – Technical Delivery Conditions

DIN 1629:1984 Seamless Circular Unalloyed Steel Tubes Subject to
Special Requirements
EN 10296-1:2003 Welded Circular Steel Tubes for Mechanical and
General Engineering Purposes – Technical Delivery Conditions –
Part 1: Non-Alloy and Alloy Steel Tubes
Supersedes:

AFNOR NF A 49-341:1975 Precision Welded Tubes for Mechanical
Application – Dimensions – Technical Delivery Conditions

AFNOR NF A 49-343:1980 Longitudinally Welded D Inferior or Equal

to 168.3 mm for Engineering Use – Dimensions – Technical Delivery
Conditions

BSI BS 6323-2:1982 Seamless and Welded Steel Tubes for
Automobile, Mechanical and General Engineering Purposes –
Part 2: Specific Requirements for Hot Finished Welded Steel Tubes

BSI BS 6323-5:1982 Seamless and Welded Steel Tubes for
Automobile, Mechanical and General Engineering Purposes –
Part 5: Specific Requirements for Electric Resistance Welded and
Induction Welded Steel Tubes (Withdrawn)

BSI BS 6323-7:1982 Seamless and Welded Steel Tubes for
Automobile, Mechanical and General Engineering Purposes –
Part 7: Specific Requirements for Submerged Arc Welded Steel
Tubes

DIN 1626:1984 Welded Circular Unalloyed Steel Tubes Subject to
Special Requirements

DIN 1628:1984 High Performance Welded Circular Unalloyed Steel
Tubes – Technical Delivery Conditions

Appendix 6 CEN Standards With Superseded Former National Standards 495



Handbook of Comparative World Steel Standards
Chapter 5: Steel Tubes and Pipes (continued)
Current CEN Standard Former National Standards Superseded by CEN Standards

EN 10297-1:2003 Seamless Circular Steel Tubes for Mechanical
and General Engineering Purposes – Technical Delivery Conditions
– Part 1: Non-Alloy and Alloy Steel Tubes
Supersedes:

AFNOR NF A 49-311:1974 Seamless Tubes for Mechanical
Application – Dimensions – Technical Delivery Conditions
EN 10297-1:2003 Seamless Circular Steel Tubes for Mechanical
and General Engineering Purposes – Technical Delivery Conditions
– Part 1: Non-Alloy and Alloy Steel Tubes
Supersedes:

BSI BS 6323-3:1982 Seamless and Welded Steel Tubes for
Automobile, Mechanical and General Engineering Purposes –
Part 3: Specific Requirements for Hot Finished Seamless Steel
Tubes (Withdrawn)

DIN 1626:1984 Welded Circular Unalloyed Steel Tubes Subject to
Special Requirements

DIN 1629:1984 Seamless Circular Unalloyed Steel Tubes Subject to
Special Requirements

DIN 17204:1990 Seamless Circular Tubes Made from Steels for
Quenching and Tempering – Technical Delivery Conditions
EN 10305-1:2002 Steel Tubes for Precision Applications –
Technical Delivery Conditions – Part 1: Seamless Cold Drawn Tubes
Supersedes:

AFNOR NF A 49-310:1994 Seamless Precision Tubes for

Mechanical Application – Dimensions – Technical Delivery
Conditions

AFNOR NF A 49-323:1978 Steel Tubes: Jacks for Hydraulic
Transmissions; Cold Rolled or Drawn Seamless Tubes, Type –
Ready for Use – Dimensions – Technical Delivery Conditions

BSI BS 6323-4:1982 Seamless and Welded Steel Tubes for
Automobile, Mechanical and General Engineering Purposes –
Part 4: Specific Requirements for Cold Finished Seamless Steel
Tubes (Withdrawn)

DIN 2391-2:1994 Seamless Precision Steel Tubes
EN 10305-2:2002 Steel Tubes for Precision Applications –
Technical Delivery Conditions – Part 2: Welded Cold Drawn Tubes

Supersedes:

BSI BS 6323-6:1982 Seamless and Welded Steel Tubes for
Automobile, Mechanical and General Engineering Purposes – Part 6:
Specific Requirements for Cold Finished Electric Resistance Welded
and Induction Welded Steel Tubes (Withdrawn)

DIN 2393-2:1994 Welded Precision Steel Tubes
EN 10305-3:2002 Steel Tubes for Precision Applications –
Technical Delivery Conditions – Part 3: Welded Cold Sized Tubes

Supersedes:

BSI BS 6323-5:1982 Seamless and Welded Steel Tubes for

Automobile, Mechanical and General Engineering Purposes –
Part 5 : Specific Requirements for Electric Resistance Welded and
Induction Welded Steel Tubes (Withdrawn)

BSI BS 6323-6:1982 Seamless and Welded Steel Tubes for
Automobile, Mechanical and General Engineering Purposes – Part 6:
Specific Requirements for Cold Finished Electric Resistance Welded
and Induction Welded Steel Tubes (Withdrawn)

DIN 2394-2:1994 Welded and Sized Precision Steel Tubes –
Technical Delivery Conditions

496 CEN Standards With Superseded Former National Standards Appendix 6


Handbook of Comparative World Steel Standards
Chapter 5: Steel Tubes and Pipes (continued)
Current CEN Standard Former National Standards Superseded by CEN Standards
EN 10305-4:2003 Steel Tubes for Precision Applications - Technical
Delivery Conditions - Part 4: Seamless Cold Drawn Tubes for
Hydraulic and Pneumatic Power Systems
BSI BS 6323-4:1982 Seamless and Welded Steel Tubes for
Automobile, Mechanical and General Engineering Purposes –
Part 4: Specific Requirements for Cold Finished Seamless Steel
Tubes (Withdrawn)
EN 10305-5:2003 Steel Tubes for Precision Applications –
Technical Delivery Conditions – Part 5: Welded and Cold Sized
Square and Rectangular Tubes
Supersedes:


BSI BS 6323-5:1982 Seamless and Welded Steel Tubes for
Automobile, Mechanical and General Engineering Purposes –
Part 5: Specific Requirements for Electric Resistance Welded and
Induction Welded Steel Tubes (Withdrawn)
EN 10305-6:2003 Steel Tubes for Precision Applications - Technical
Delivery Conditions - Part 6: Welded Cold Drawn Tubes for
Hydraulic and Pneumatic Power Systems
Supersedes:

BSI BS 6323-6:1982 Seamless and Welded Steel Tubes for
Automobile, Mechanical and General Engineering Purposes – Part 6:
Specific Requirements for Cold Finished Electric Resistance Welded
and Induction Welded Steel Tubes (Withdrawn)