HPE proliant DL380 gen10 server (1) 53 Core Options
Bạn đang xem bản rút gọn của tài liệu. Xem và tải ngay bản đầy đủ của tài liệu tại đây (48.79 KB, 1 trang )
QuickSpecs
HPE ProLiant DL380 Gen10 Server
Core Options
Notes: Legacy FIO Mode (758959-B22) not supported with this option on Networking Choice (NC) Configureto-Order (CTO) chassis. To continue with the combined selection of this networking option and Legacy FIO
Mode on NC CTO chassis, an additional networking option (stand-up NIC or FlexibleLOM) without the Legacy
FIO mode restriction must be selected.
HPE Ethernet 10Gb 2-port SFP+ BCM57414 Adapter
Notes: Cannot be selected as the primary networking choice when configuring a Networking Choice (NC)
Configure-to-Order (CTO) chassis.
HPE Ethernet 10Gb 2-port SFP+ X710-DA2 Adapter
HPE Ethernet 10Gb 2-port BASE-T X550-AT2 Adapter
P08421-B21
727055-B21
817738-B21
25 Gigabit Ethernet adapters
Notes: Unless otherwise noted, one of the below 10/25Gb networking adapters below can be selected as the
primary networking choice when configuring a Networking Choice (NC) Configure-to-Order (CTO) chassis.
The DL380 Gen10 NC CTO chassis does not come with embedded networking, hence the requirement to
configure with either a FlexibleLOM or select PCIe networking adapter.
HPE Ethernet 10/25Gb 2-port SFP28 QL41401-A2G Adapter
HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter
Notes: Legacy FIO Mode (758959-B22) not supported with this option on Networking Choice (NC) Configureto-Order (CTO) chassis. To continue with the combined selection of this networking option and Legacy FIO
Mode on NC CTO chassis, an additional networking option (stand-up NIC or FlexibleLOM) without the Legacy
FIO mode restriction must be selected.
HPE Ethernet 10/25Gb 2-port SFP28 MCX4121A-ACUT Adapter
867328-B21
817718-B21
817753-B21
100 Gigabit Ethernet Adapters
HPE Ethernet 100Gb 1-port QSFP28 MCX515A-CCAT Adapter
874253-B21
Notes:
- The DL380 Gen10 embedded LOM chassis ships standard with 4x 1 Gb embedded
- A minimum of two Gigabytes (2 GB) of server memory is required per each adapter.
- Direct Attach Cable (DAC) for copper environments or fiber transceivers and cables for fiber-optic environments must be
purchased separately. Please see the related NIC QuickSpecs for Technical Specifications and additional information:
/>
FlexibleLOM adapters
Pensando Distributed Services Platform for HPE iLO Sideband Management Adaptive LOM Module
Notes:
- This option requires the selection of Pensando DSP 10/25G 2p SFP28 Card (P26966-B21).
- Legacy FIO Mode (758959-B22) not supported with this option on Networking Choice (NC) Configure-toOrder (CTO) chassis. To continue with the combined selection of this networking option and Legacy FIO
Mode on NC CTO chassis, an additional networking option (stand-up NIC or FlexibleLOM) without the
Legacy FIO mode restriction must be selected.
- This option cannot be selected with any GPU
HPE Ethernet 1Gb 4-port FLR-T I350-T4V2 Adapter
HPE Ethernet 1Gb 4-port FLR-T BCM5719 Adapter
HPE FlexFabric 10Gb 2-port FLR-T 57810S Adapter
HPE FlexFabric 10Gb 2-port FLR-SFP+ 57810S Adapter
HPE Ethernet 10Gb 2-port FLR-T BCM57416 Adapter
HPE FlexFabric 10Gb 4-port FLR-T 57840S Adapter
HPE Ethernet 10Gb 2-port FLR-SFP+ BCM57414 Adapter
HPE Ethernet 10/25Gb 2-port FLR-SFP28 BCM57414 Adapter
HPE Ethernet 10/25Gb 2-port FLR-SFP28 MCX4121A-ACFT Adapter
HPE Ethernet 10Gb 2-port FLR-SFP+ X710-DA2 Adapter
HPE Ethernet 10Gb 2-port FLR-T X550-AT2 Adapter
P26969-B21
665240-B21
629135-B22
700759-B21
700751-B21
817721-B21
764302-B21
P08440-B21
817709-B21
817749-B21
727054-B21
817745-B21
Page 53
