Hướng dẫn kết nối màn hình HMI delta với biến tần Fuji
Bạn đang xem bản rút gọn của tài liệu. Xem và tải ngay bản đầy đủ của tài liệu tại đây (121.62 KB, 3 trang )
Series HMI Connection Manual
Fuji Frenic Inverter
HMI Factory Setting:
Baud rate: 9600, 8, None, 2
Controller Station Number: 1(Note1)
Control Area / Status Area: None/None
Connection
a. RS-485 (DOP-A/AE Series)
DOP series
Controller
9 pin D-sub male (RS-485)
D- (1)
DXD- (4)
D+ (2)
DX+
D+ (3)
b. RS-485 (DOP-AS57 Series)
DOP series
Controller
Terminal Block
50
R+
DX+
R-
DX-
V1.00
Revision March, 2010
Series HMI Connection Manual
Hướng dẫn kết nối PLC với HMI Delta DOP
c. RS-485 (DOP-AS35/AS38 Series)
DOP series
Controller
Terminal Block (RS-485)
R- (1)
DXT- (4)
R+ (2)
DX+
T+ (3)
d. RS-485 (DOP-B Series)
DOP series
Controller
9 pin D-sub male (RS-485)
D+ (1)
DX+
D- (6)
DX-
Definition of PLC Read/Write Address
a. Registers
Type
Format
Word No. (n)
Read/Write Range
Data Length Note
Fundamental functions
Fn
F0 – F42
Word
Extension terminal
En
E1 – E47
Word
Cn
C1 – C33
Word
motor Parameters
Pn
P1 – P9
Word
High speed frequency
Hn
H3 – H39
Word
Alternative motor
An
A1 – A18
Word
Optional functions
On
O1 – O29
Word
Setting data function
Sn
S1 – S12
Word
Monitoring data functions
Mn
M1 – M48
Word
functions
Control functions of
frequency
parameters
V1.00
Revision March, 2010
www.plc.today 51
Series HMI Connection Manual
b. Contacts
Format
Type
Read/Write Range
Word No. (n)
Bit No. (b)
Fundamental functions
Fn.b
F0.0 – F42.15
Extension terminal
En.b
E1.0 – E47.15
Cn.b
C1.0 – C33.15
motor Parameters
Pn.b
P1.0 – P9.15
High speed frequency
Hn.b
H3.0 – H39.15
Alternative motor
An.b
A1.0 – A18.15
Optional functions
On.b
O1.0 – O29.15
Setting data function
Sn.b
S1.0 – S12.15
Monitoring data functions
Mn.b
M1.0 – M48.15
Note
functions
Control functions of
frequency
parameters
NOTE
1)
Controller Station Number range from 1 to 31, and Number 99 is for radio broadcast.
2)
Not all address is applicable to radio broadcast. Please refer to Fuji Frenic Inverter
manual for details on radio broadcast address.
3)
Not all address can be read and write. Please refer to Fuji Frenic Inverter manual for
details on read/ write characteristics.
52
V1.00
Revision March, 2010
